Recent content by twingolo

Hi, The axle is static, the hub is spinning around like in a classic wheel. You don't need to weld anymore, all is assembled by stanless screw. The fork have to be locked in road position, its ok if you don't want to practice downhill. Fred

Thanks christerljung, new speed record : 56 kph In descent of course

Hello, I finaly finished my ebike, the result is pretty good and the performance are better than i was hoping. Max speed : 47 kph i let you see some pictures... Bye

The come back with new picture of the parts on the bike: Tutorial for the switche on an hydraulic brake : http://endless-sphere.com/forums/viewtopic.php?f=28&t=42477 Motor and transmition: amberwolf, you were right, first test on a medium bump, front tire is limit to touch the box, i...

The link for the switch http://radiospares-fr.rs-online.com/web/p/microrupteurs/0150697/

Hello, Here is my solution for adding switch on my hydraulic brake of my Scott. We begin with the underside of this brake: I made a new handle shaft in stanless steel screw. Detail of the new and the old one I fixed a microswitch on the back of the bracket The switch suit very...

The hub motor modified: This one is geared and have a freewheel built-in, but no hole for a disk brake. The 15 thooth sprocket is bolted on the side of the motor thru an home made adaptator.

Small or big bump, nô problem, this is a CAD picture on a phone picture, the scale is not respected. There is enought space with this tire.

Hi, I'am building another one Ebike (for my syster this time), not a beast, but efficient and easy to use. The description: Motor : 8FUN 24v sensored Battery : 36v 9 AH 12s2p (4 x Turnigy lifepo4 4500mah) Activation : PAS Controller : 36v 15A : 540w Theoric Speed : 45 kph. Freehheel : on...

Yes, the large one is more readable!

Thanks for your interrest! :D The front, back, body and clamps have been cut by waterjet from my CAD design in stanless alloy. 120€ Alloy and cutting. Soon, next step will be to connect differents parts : CA, remote receiver and regulator. Fred.

Some pictures of my new CA box. :D