Search results

Date Relevance Most replies

  1. F

    BikeE basic hauler

    I think you’ll find it is a very solid mount.
  2. F

    BikeE basic hauler

    Hi, I was pretty easy. I used 2 muffler clamps (from memory, I believe they were 1-3/4”) to secure a 1/4” aluminum plate to the u-bolts. To get clearance for the battery mounting bracket I needed to add couple of bolts to create a standoff. If the pics below are to dark let me know and take a...
  3. F

    BikeE basic hauler

  4. F

    BikeE basic hauler

    Hi, Good questions! The battery mount worked very very well! I knew I was taking a chance with the handling characteristics by adding the suspension fork.... here's the skinny. It caused fork flop. The will lung left or right when putting it on the kick stand. It is slightly more unstable at...
  5. F

    BikeE Build

    Thanks to all for the advice, but I got lucky and found a wire on the throttle, that had been previously wrapped in tape, it was cut about half way through the conductor. I soldered it together and everything is back to normal. Shark battery is on the way to replace the current goofy looking...
  6. F

    Crystalyte H3540 Noise

    Thanks Goatman, I appreciate the advice, but I got lucky and found a wire on the throttle, that had been previously wrapped in tape, that had been cut about half way through the conductor. I soldered it together and everything is back to normal. Regards, Frank
  7. F

    Crystalyte H3540 Noise

    I haven’t pulled the cover yet! Guess I’m hoping for an easy fix..... going out to check the connectors at the motor now. Thanks for the response, Frank
  8. F

    BikeE Build

    Hi Thundercamel, It also does it when using pedal assist too. Thank you, Frank
  9. F

    Crystalyte H3540 Noise

    I finished a tandem build.... almost. It ran fine for a few short test rides then developed a horrible noise and vibration. My first thought was the axle had shifted and the tire was rubbing. That was not the case. Then the noise changed to what is in the video below. I believe all the...
  10. F

    BikeE Build

    I finished the tandem build.... almost. It ran fine for a few short test rides then developed a horrible noise and vibration. My first thought was the axel shifted and the tire was rubbing. That was not the case. Then the noise changed to what is in the video below. The motor is a Crysalyte...
  11. F

    Single wall rim question

    A mans gotta know his limitations!
  12. F

    BikeE Build

    For the sake of expedience, I have decided to change course. I’m going to move my big motor conversion equipment over to a Schwinn tandem relic I’ve had laying around for years. That will get me and the wife riding again soon and allow me time to finish the BikeE. I am thinking that if I go with...
  13. F

    Single wall rim question

    Crazy time for bike shops! I live near Ann Arbor, MI and one shop said they now only servicing bikes they sold and are quoting customers September completion dates. See the photo below of the bike racks at Walmart in Howell, MI. Shipping delays are....... For the sake of expedience, I have...
  14. F

    Single wall rim question

    Wow, there are a lot of variables that I didn’t realize. I need to get more information about my rim before I make a decision or even ask for more advice. Additionally, the local bike shops are not very interested in doing the job.... most just refuse and others don’t call back or are quoting...
  15. F

    Single wall rim question

    Hi, I’m doing a BikeE recumbent conversation. I have a 20” single wall rim that I would like to use with my 2000 watt rear DD motor. I’m apprehensive about the single wall rim strength! Given the small diameter, and I’m don’t a hot rodder, is the single wall adequate? Thanks much, Frank
  16. F

    Studebiker's Next (last?) Bike E.........

    Hi Studebiker, Your front tire looks quite large! What size did you use? Thank you, Frank
  17. F

    70$ Li-Ion Battery Pack 48V 10.5Ah 500w output

    What is the max amp output? What is the continuous amp output? Thank you
  18. F

    BikeE Build

    Perfectly understandable. Could make the difference in getting the tire size I want. Today I mounted the battery in a semi-permanent fashion. Not real happy with it, but it should suffice for proof of concept. I’m very happy with my Allcell battery, but the bike is much better suited to a...
  19. F

    BikeE Build

    Thundercamel, I like the idea of a wider bb. If I can make that work it, and it would clear the fork and the tire it would be the best solution! That will be the first thing I attempt once it’s up and running. Suntour has a better/stronger 20” fork, but it has a through axel and I if I end up...
  20. F

    BikeE Build

    Update: I used a seat post adapter (1-1/8” to 30.9mm). It worked reasonably well. Then I bent the crank arms so they clear the new fork (pics below on how I did that). I should let anyone interested in doing this, that my method worked but the result was not optimal (more pics below). I will...
  21. F

    BikeE Build

    Thundercamel, the Optima looks REALY comfortable! Nice job with the battery location too. :thumb: As Neptroonix warned about the wheelie issue, I am struggling with the idea of using the rear hub motor in lieu of a front. Yesterday, I was able to get the left side crank arm bent enough to clear...
  22. F

    BikeE Build

    Thanks for the links Amberwolf. Fournier makes one that I believe will work perfectly, but I can’t find a source that can ship within a reasonable time frame..... some are quoting July. I’m going to pursue local metal suppliers for an aluminum tube with a 1-1/4 OD and an ID of 1-1/8”. I can cut...
  23. F

    BikeE Build

    I’ve received helpful input from other members, to whom I say thank you again, but have never had anything to contribute until now. I’m converting a BikeE to a gravel grinding electric! I’m 73 and have the typical back and body part problems that age brings. Currently riding a Manhattan...
  24. F

    BikeE basic hauler

    I’m thinking of mounting a bottle battery on a U shaped bracket that bolts to the frame in front of the crank! I think if I use a thick enough aluminum sheet, then bend it into shape, it could be angled upwards on the sides to create a higher profile In the front where the battery base plate...
  25. F

    Looking for a wheel

    Thank you Goatman! Looks like your suggestion will work just fine.
Back
Top