Search results

Date Relevance Most replies

  1. Needmorespeed

    Someone has Stolen my ebike

    Yes. I’m looking on all the sites and asking around. My bike wasn’t locked up it was in my workshop that was locked where they stole a couple of hand tools but I think it was someone with knowledge of the bikes. They stole the flight case with all the balance monitors and charges in it. We’re...
  2. Needmorespeed

    Someone has Stolen my ebike

    Yes authorities have been notified but I just want them back. Not a lot of people could handle a bike like that. I’ve had nearly 60mph on it and will throw you off the back if you don’t lean forward
  3. Needmorespeed

    Bitcoins

    Bitcoin was the first mover so had an advantage over other Crypto’s but Xrp has a far better future and real utility in moving cross border payments around the world completely eliminating nostro/vostro holding accounts. Bitcoin is too Centralized with most mining in China nowadays.
  4. Needmorespeed

    Someone has Stolen my ebike

    This the other one that’s gone
  5. Needmorespeed

    Someone has Stolen my ebike

    Gutted! After years of trial and error I finally had a well built bike that didn’t break every 5mins. And some asshole is having fun on them!
  6. Needmorespeed

    Someone has Stolen my ebike

    Here’s some pics. I hope they upload this time
  7. Needmorespeed

    Someone has Stolen my ebike

    Here’s more pics with the charger case that was also stolen
  8. Needmorespeed

    Someone has Stolen my ebike

    They were stolen from Hertford Uk Any help would be much appreciated :thumb:
  9. Needmorespeed

    Someone has Stolen my ebike

    Guys. I know this is a long shot but my bike has been stolen along with my friends. They are the both self build fast ebikes. Having spent years building and rebuilding them and now they’ve been stolen. Mine is a mid motor and my friends is a dual motor. Was going to do some posts on them but...
  10. Needmorespeed

    Dual mid drive hub drive prototype

    Thanks! Been very frustrating getting here. Never seem to have time to do it and there's always another problem to solve. But that's just ebiking for you I s'pose ! I'll get some pictures of the other side now the gng is direct drive.
  11. Needmorespeed

    Dual mid drive hub drive prototype

    Just about finished my new dual drive ,got some chain issues to fix but it's nearly they're.here's a pic for, anyone's that's interested I've got a few more pics of some of the mods I've had to do ,
  12. Needmorespeed

    Storm the embassy

    The outtakes at the end are funny! :lol:
  13. Needmorespeed

    Storm the embassy

    A friend just texted me this link to YouTube and wanted to share it The guys a madman but it's brilliant! Sorry if it's already on here but just had to share :D Try the link or search for torque tomahawk storm the Embassy. http://m.youtube.com/watch?v=REeeYtp-8qE
  14. Needmorespeed

    40 mph club

    Been breaking the 40mph for a while on the dual motor hub/mid mount combo and have just recently hit over 60mph! Just got a new frame to cope with all the stress!
  15. Needmorespeed

    Dual mid drive hub drive prototype

    Been scouring EBay and have just recieved the new frame It's a tomac magnum. Super strong frame apparently. Think it lends itself to being an ebike Any info on this bike greatly appreciated as I've not heard of one before. Going to take my time on this project so won't be many posts in the...
  16. Needmorespeed

    Dual mid drive hub drive prototype

    Needmorespeed doesn't need any more speed !!!! After fixing the driveshaft with a new bit of silver steel I managed to get out this morning and hit a new top speed. Now it's proved that the two motors run perfectly together I will be making up a new frame with welded battery box and some decent...
  17. Needmorespeed

    Dual mid drive hub drive prototype

    Good to see other peoples take on the idea! I got mine running at 96v now just to see what it's like.... Went like a motorbike for a few minutes and then sheared off the drive shaft!!! Ouch!! Out of action with the gng. But at least I've got the hubby to get about still. Lovely backup when...
  18. Needmorespeed

    Dual mid drive hub drive prototype

    Pics of the bike with the crystalyte installed. Laced to a 24" rim with with a 3" tyre. Went for a spin on it today. Pouring down with rain,still managed 50 mph New downhill 46 chainring added. Runs so smooth,don't even notice the extra weight on the back.
  19. Needmorespeed

    Dual mid drive hub drive prototype

    Crystalyte came the other day and I've managed to put it on Need to sort some new chain ring as I'm getting lots of problems. But the new hub runs perfectly and helps the gng to run much smoother. Can climb hills at 40 mph Pics coming soon :D :D :D
  20. Needmorespeed

    Dual mid drive hub drive prototype

    Good luck with that Let us know the outcome :D
  21. Needmorespeed

    Dual mid drive hub drive prototype

    I'm using two on the same side I've got the thumb throttle for the hub and twist grip for the mid mount Works perfectly, pull away smoothly with the hub using your thumb and floor it with gng twist grip! Not sure how well it'd work putting two different motors through one throttle. Plent of...
  22. Needmorespeed

    Dual mid drive hub drive prototype

    Crystalyte ordered! Will be lacing in to a 24" rim If anyone is thinking of doing this ,DO IT DO IT DO IT !!! Not only do you get extreme power, you get the added benefit of using everything to a safer limit without pushing an individual motor and running gear to breaking point. DUAL POWER IS...
  23. Needmorespeed

    Dual mid drive hub drive prototype

    oh dear!! My old hub has finally given in.went for a blast around the fields and broke the cover plate.Couldn't cope with the speed!!! Got 51 mph from the dual drive finally breaking the 50 mph barrier though, Am going to invest in a crystalyte next week,will keep you posted when it's fitted...
  24. Needmorespeed

    Sun-Thing28 Ebike Kit Build

    I've got an old sun thing motor on my dual drive. I'm running 72v through it and is ok on that. It's been through the wars and I've abused it a lot but it still going strong! Apart from having to replace the rear crank fitting as the motor one broke!The only thing I'm using from the kit is the...
  25. Needmorespeed

    Dual mid drive hub drive prototype

    I've got mine running at 48ampswith 72v on the gng using a 12fet Lyen and the rear is 38amp 72v ,it's super fast and runs well with 20ah. So should be running 6100w combined or there abouts but when I have the ca connected to the gng it only shows about 2300w..? So combined its producing about...
Back
Top