• Howdy! we're looking for donations to finish custom knowledgebase software for this forum. Please see our Funding drive thread

Search results

Date Relevance Most replies

  1. danjpendleton

    Lyen controller/cycle analyst throttle cutting out

    The connector between the cycle analyst and controller was bad. Pins looked fine, but as soon as I bypassed the connector it worked properly. I ended up just soldering each wire and heatshrinking for a hardwired connection. This permanently bypasses the connector, as I never take the controller...
  2. danjpendleton

    Lyen controller/cycle analyst throttle cutting out

    Ok this is exactly what I needed to know. Logically in my head it made sense to just run the throttle wire from the cav3 to the actual throttle input wire into the controller, but I wasn’t sure if any of the other wires needed to join it(ie: ground) or if that is a different circuit entirely...
  3. danjpendleton

    Lyen controller/cycle analyst throttle cutting out

    Do you know which pins I should be testing at the jst connector? Pin 1: Red = Battery + Pin 2: Black = Ground Pin 3: Black = Shunt - Pin 4: Yellow = Shunt + Pin 5: Green = Speed sensing Pin 6: Blue = Hall Effect Throttle Over-Ride Sent from my iPhone using Tapatalk
  4. danjpendleton

    Lyen controller/cycle analyst throttle cutting out

    Hello! Hope all are well. So I built an electric fatbike years ago and rode the hell out of it until a couple years ago after running into an issue with the controller. The bike is hs3540 crystalyte, hall sensors disabled with external speedo Lyen 45 amp controller Cycle analyst v3 76v...
  5. danjpendleton

    76v 13.3Ah samsung 20R pack with kelly 100-150A controller

    Wesnewell - do you think this kelly controller would work well with an hs3540(drilled side covers) in a 26" wheel? http://kellycontroller.com/keb72300x24v-72v150a30kw-bike-brushless-controller-p-273.html
  6. danjpendleton

    76v 13.3Ah samsung 20R pack with kelly 100-150A controller

    cops dont care as long as its not noisy and it has pedals. nh is pretty easy going. live free or die i guess
  7. danjpendleton

    76v 13.3Ah samsung 20R pack with kelly 100-150A controller

    Em3ev. He said the bms will allow for small bursts over 100amps but will power a 100amp controller.
  8. danjpendleton

    76v 13.3Ah samsung 20R pack with kelly 100-150A controller

    Just wanted to get peoples opinions on running my current battery with a high amperage controller from kelly. Battery is 21s7p samsung 18650 20R cells. 13.3ah total. 50amp BMS but have been told by battery manufacturer that battery will provide 100A+current for short bursts. Ive also been...
  9. danjpendleton

    Friction Drive New Kepler carbon build

    im digging this. i bet it will be a lot of fun. ive hit almost 60mph downhill on my trek madone. nothing beats the feeling
  10. danjpendleton

    Mongoose dolomite fatbike? 7spd, disk brakes, INEXPENSIVE

    ive been loving the bike. itll hit almost 40 on flats but i usually cruise and pedal around 26-29 mph. its a lot of fun
  11. danjpendleton

    Mongoose dolomite fatbike? 7spd, disk brakes, INEXPENSIVE

    Rear pannier is axiom. The frame bag is em3ev
  12. danjpendleton

    Modern boardtrack-inspired cruiser build

    For sale thread: https://endless-sphere.com/forums/viewtopic.php?t=74146
  13. danjpendleton

    Modern boardtrack-inspired cruiser build

    This bike is now for sale.
  14. danjpendleton

    Modern boardtrack-inspired cruiser build

    I know use strava.
  15. danjpendleton

    Welcome to the Electric Horsemen

    This is awesome
  16. danjpendleton

    Modern boardtrack-inspired cruiser build

    That was actually the frame i had in mind. im a little concerned on battery mounting though. Might be able to mount in the small triangle above the bb
  17. danjpendleton

    Modern boardtrack-inspired cruiser build

    6 ft
  18. danjpendleton

    Modern boardtrack-inspired cruiser build

    still considering selling this without the battery, but will provide contact for manufacturer of the battery if desired. ive received some interest, just need to add up my investment and come up with a reasonable asking price. ill keep everyone posted
  19. danjpendleton

    Modern boardtrack-inspired cruiser build

    i might just transfer most of the stuff over to a new larger stretched out frame. Just wanted to see if there was any interest.
  20. danjpendleton

    Modern boardtrack-inspired cruiser build

    I am considering selling this bike because its a bit small for me. Id hate to part it out. Any interest?
  21. danjpendleton

    Board Track Racer Style Felt Cruiser

    Nice build!!! im looking into a different frame at the moment. Something a bit more stretched out for comfort. i plan on running a springer fork like that. hows it feel over bumps? is it fairly stiff or is there a decent amount of springiness
  22. danjpendleton

    Vector bike and frame owners.

    Subscribed
  23. danjpendleton

    Mongoose dolomite fatbike? 7spd, disk brakes, INEXPENSIVE

    Just received a new one from him free of charge. Guess there was a faulty internal component
  24. danjpendleton

    Mongoose dolomite fatbike? 7spd, disk brakes, INEXPENSIVE

    I had an issue with my lyen extreme modder controller 45A. after about a month and a half it started losing current output. it shouldnt have burnt up[IMP] I sent it back to him to take a look
  25. danjpendleton

    Mongoose dolomite fatbike? 7spd, disk brakes, INEXPENSIVE

    The hs3540 from ebikes.ca is reliable but takes some fiddling to fit. Sounds like the mxus 3000 watt is a pretty good motor though
Back
Top