Search results

Date Relevance Most replies

  1. O

    Throttle cut delay when releasing throttle?!

    Perfect, problem solved! Thanks I also set my up ramps to 99, and changed wgain to 50 and A-gain to 5 according to another post, and now the throttle is very nice and crisp. Or am i pushing it in some way now that i shouldnt?
  2. O

    Throttle cut delay when releasing throttle?!

    When i cut back/let go on throttle under hard acceleration, the bike continoue to accelerate for another 0.5sec+ before it reduce power. Is this normal, and/or possible to fix? Its annoing for me thats used to motorcycles, playing with wheelies etc, not to have that direct feeling with the...
  3. O

    HS3540 on 18S lipo, basic questions

    The bike is running now! Got 80-100km on it, and it runs perfectly! It makes 65km/h on flat ground, and can do 25km at 40km/h, just like the ebike calculator claimed! After a full battery run at 40km/h, my stator is 62'C (25'C outside), so everything seems perfect! Acouple more questions has...
  4. O

    75v dc to 8v dc psu/regulator for headlight supplied from CA

    Any good and cheap regulators for my 18s lipo setup, to a 8-8,4v headlight ? Thinking of soldering the wires inmy CA v3 to get voltage output from it to a lamp, and i guess the supplied voltage will them be my total 18s battery voltage? Or am i way off?
  5. O

    Best Charger etc for 20c 5000mah 6s lipo

    Buy a $174 powerlab pl6 from progressive rc, and dont look back :) I use 2 pl8's, and are thinking of buying a 3rd... I built a powersupply out of 2 HP dps-1200 computer psu's in series, making 24v 100A! Youll find alot of info if you search for it on google, especially on rc forums.
  6. O

    usb ttl readout settings of Lyen controller?

    Thanks guys Yes, i see a file i probably have in my controller, a 123077 with 3 speed. Ill ask Edward for my exact file anyway then. But if you can not readout what the settings are, how do you know that the flash worked out? If the file ive got is the same as i found on that page, my phase...
  7. O

    usb ttl readout settings of Lyen controller?

    Is it possible to do a readout of the controller setup, as it is programmed from before? Without having the saved .asv file? Im trying to, but i can only find info about flashing, and nothing about readout.
  8. O

    HS3540 on 18S lipo, basic questions

    What freewheel should i buy for the HS3540? My bike has stock, a 9speed cassette.. So i guess i need to buy a 7speed freewheel thats threaded. Is ANY shimano 7speed threaded freewheel OK to buy, or do i need something spesific? Please guide me :) The bike has a Deore XT derailure/gear if it...
  9. O

    HS3540 on 18S lipo, basic questions

    There is no doubt in that he has sold me a 12 fet 3077 mark II lyen edition controller, and he confirmed before i ordered that it will be perfect for my setup with 18s lipo, fully charged at 75v. What he might have done to it, or not, i dont know..
  10. O

    HobbyKing Turnigy 20C lipo after 1 year, 200+ cycles

    I had 4 x 5s5000mah nanotech's (running as 10S) in a rc plane, that all of them had 500+ cycles over 3 years, without feeling i lost alot of power/capasity at all.. Delivering 80-85A max, never below 20% capasity, and always charged at 2C. Now im at around 70 cycles on my 6s8000mah (running...
  11. O

    HS3540 on 18S lipo, basic questions

    Mr Lyen recommended this controller, modified to the voltage im going to run.. Ihavent asked for the 3077, he told me what to run.. He also set me up with everything else i needed. After reading alot on this fora about Edward, i believe im in good hands :)
  12. O

    HS3540 on 18S lipo, basic questions

    Well, i'm trying 40A atleast. Lyen said the 12fet 3077 could handle 3500w continous though, so that tells me maximum of 45-50A.. But i guess 40A will do, and hopefully make the bike handle well without needing to worry about overheating stuff all the time. If (when) tired of it, ill build a...
  13. O

    HS3540 on 18S lipo, basic questions

    Hi all Im doing my first project bike now, and even though ive searched and read looaaads on this board, i still need a few answers.. Setup is 18S lipo, 8ah (might be 16ah later), Lyen 3077 controller, HS3540 and CA v3. Everything bought new from Lyen. Its going on a 26" full suspension bike...
  14. O

    Rim and spokes for hs3540?

    Thanks for the heads up! Ive read my eyes sore this last week, and still miss out on details like that. But i think im getting close now :) Next will be to get my mind around the CA v3 i also ordered, and connecting the kit together when i get it.. Shouldnt be to hard.
  15. O

    Rim and spokes for hs3540?

    Perfect, thanks. 12G spokes? Anyone got a 28"/700c setup rim/spokes?
  16. O

    Rim and spokes for hs3540?

    Thanks for the link, and yes it does seem very easy to use.. But i have to order a rim first (want too keep my stock wheel), to get measurmenst for spokes.. So i have to wait, and wait, and then wait some more. So therefor i was hoping someone could guide me to a setup of rim/spokes they KNOW...
  17. O

    Rim and spokes for hs3540?

    Hi New to this forum, atleast just registered here (been reading alot), and got a question regarding rim/spokes for my first bike project. Ive ordered a hs3540 crystalyte, thats going to be fed with 18s lipo and a lyen 12fet 3077. Going on a hybrid/city bike with rim brakes for now, but...
Back
Top