Throttle cut delay when releasing throttle?!

[OlaGB]

When i cut back/let go on throttle under hard acceleration, the bike continoue to accelerate for another 0.5sec+ before it reduce power.

Is this normal, and/or possible to fix? Its annoing for me thats used to motorcycles, playing with wheelies etc, not to have that direct feeling with the motor..

The throttle is calibrated through CA v3, and i run a 12fet 3077 on a hs3540.
Programmed to 45A (105A phase), 0.8 block time.

 

[teklektik]

Ramping is not set optimally for your riding style.
Try ThrO->DownRate = 99V/s as described in the Guide.

 

[gwhy!1]

I may be wrong but i think it may be to do with your CA..

some one beat me to it.

 

[OlaGB]

Ramping is not set optimally for your riding style.
Try ThrO->DownRate = 99V/s as described in the Guide.

Perfect, problem solved! Thanks

I also set my up ramps to 99, and changed wgain to 50 and A-gain to 5 according to another post, and now the throttle is very nice and crisp.

Or am i pushing it in some way now that i shouldnt?