Search results

  1. E

    Brushless Scooter Motor vs Hobby RC Motors?

    thanks for all the info on the bona motor! picked one up but my controller spins it up then cuts off 2/3 thirds into throttle :( here is my solution for cooling 1020 or boma sized motors 3s edf should through motor
  2. E

    Electra 43cc EVT Conversion

    Adding EVT HUB to Electra 43cc Chopper frame, not a fan of chopper look so converting to cafe lines fairings etc picked up this hub on ebay for $90 1-Q? What EVT motor is this? 1500w or 3000w 2-Q? Will motor work with 48v 1000w china controller?? how about performance? 3-Q? Can 48v 16ah...
  3. E

    Razor E3KW Brushed

    Great posts Ianhill, I too have taken the e300 to the max of its commute abilities, but decided to overvolted the smaller 36v 1020 to get the desired results. I use the 36v 13a 2250rpms motor on 48v it handles the heat very well, carries two ppl and gets to 24mph on 55t but most importantly it...
  4. E

    Turnigy Aerodrive SK3 - 6374-149kv for $46 !!

    Exactly What would I have to do to use this on a light stand up scooter for heavier rider? Have others done it with this motor?
  5. E

    HK Lipo Bricks - what do I choose and why?

    this battery works excellent for me 3x4s - 48v16ah
  6. E

    48v Cafe Racer

    48v Worksman INB straight bar removed added quarter faring, 5s light source
  7. E

    HK LIPO and BMS?

    Here is my solution, with 48v16ah commute is 1/4 battery capacity so charge after second trip to school at school. no bms, cells perfectly balanced and no issues.
  8. E

    Yet another Noob Question for HUB Help

    was a crapped out motor, tried different controllers, replaced with 48v1500w system
  9. E

    Yet another Noob Question for HUB Help

    dang tried all different phase combos nothing still...
  10. E

    Yet another Noob Question for HUB Help

    On switch is on throttle, clicks lights on assumed it work allow throttle to turn motor. looks like I could do procedure to check combos of wires… too bad they came connected plugged in
  11. E

    Yet another Noob Question for HUB Help

    I purchased a budget hub kit for GF for holidays. 36v500w not great but cheap… Connected everything but PAS, brakes, and light (which is not ON switch). Plugged in battery and throttle lights lit up but no hub movement with throttle twist. Everything seems to be connected correctly, Do I have...
  12. E

    Goped ESR upgrade - TURNIGY 6374 build

    This thread is a great example of costs/benefits of going rc outrunner in a stand up scooter. I know many have done it but IMO outrunner is overkill in a standup and waste of watts/power and will not be a reliable setup longterm. If you want 24mph and 14miles range you can do it super cheap...
  13. E

    Razor e200? repair/modification

    Hey man I have several motors in that range if you decide to upgrade that 200 a bit, is what I did with my 300 and I love it!!
  14. E

    HK LIPO and BMS?

    Thanks for the replies :) dogman might you have a pic of your single cell pack charger setup alarms warn me if a cell gets too low but combination of pushing 6s5ah quite hard for short distances ruined more than a few packs, your setup will help and me using larger capacity packs. Its just...
  15. E

    HK LIPO and BMS?

    Is a BMS needed with LiPo battery? and how would I hook it up? I use alarms to monitor LiPo during ride and balance charge to make sure balanced - BUT I've had times where a cell or two become .2 unbalanced while running and my entry level hk chargers don't balance them well at all when they...
  16. E

    Arbor Tadpole LB

    Chopped razor frame and 24v drive train Rc throttle to mechanical twist good for casual trips and straight bike paths ;)
  17. E

    Razor E300 - Acid lead to LiPO

    Battery sharks has a crazy deal on 3x 12v 18ah for $92 shipped - that is the most cost effective deal for 36v18ah I've seen!
  18. E

    Razor E300 - Acid lead to LiPO

    Depends… If your 300 has thumb throttle variable speed right now then controller will probably be able to take 36v easy. I did this and been overvaulting stock with 36v lipo for great results. If you are heavy you will want to change out the 55t with 80t then your motor will last. Otherwise it...
Back
Top