Search results

Date Relevance Most replies

  1. F

    Sinister R9

    Oh, that's just the INR-21700-P42A pack you can see and only one. There are two of those, 60amp a piece for 72V 20S2P at 120amp combined sustained (80cells) , load tested and FLIR imaged for hot spots. They were supposed to go in the 100mmx50mm cans when they didn't fit I had to go 125mmx50mm...
  2. F

    eBike related abuse

    What a fabulous discourse. @Flat Tire, howsit going cnut :lol: I way 80kg and you will always be an Arsss-Hole, it's not your fault I understand. Take Care and try to be kind to yourself, if not other.
  3. F

    Sinister R9

    Some more Pics, I should take more of the wiring techniques I'm using. The USD8-A for leaked on one spring chamber (same side as the preload chamber), I returned it and you see the older USD8-S from shocks on there. The new style and old style USD8 is completely different. Calliper locations...
  4. F

    Sinister R9

    Alots been going on. In summary. Dual front Tektro brakes are installed. Changed out Sabvoton 72150 with a 96120 and I have 2x 30S boards and a charger that tops at 126VDC Found a takasago excel 21x1.6 on Amazon for $120 AUD delivered, then found a secondhand one for $40 AUD. Custom wiring...
  5. F

    eBike related abuse

    I know this is 5 years old, but I did see the comment by RoboCop and I'm also so in Perth. I had the same experience comming on to the cycleway at the Bayswater train station, "you will always be fat" comming the other way. Too funny. Paul
  6. F

    Sinister R9

    Wheel Builds, mounting motorcycle tyres comes with it's own challenges.
  7. F

    Sinister R9

    So busy... No time for words, it is comming together....
  8. F

    Sinister R9

    I should have built my own wheel in 12Gauge, I think I might order the spokes. It would have been alot better if everything arrived in the Holidays. I actually think the wheels are better built with the washers, especially at high spoke angles. Don't use 19x1.85 rims they are massive. I...
  9. F

    Sinister R9

    Stuff arrived. I'm now told there is no such thing as a 14mm shaft on 135mm dropouts, only 16mm. Back to the machinist, actually I think it is going to be the die grinder....
  10. F

    Sinister R9

    Friday night, long week. Welding and machining of the dropouts is complete. I finished replacing the suspension bearings and headset bearings with NSK's. Changed all the suspension bolts to Stainless. I made a stainless plate to go in the head tube to replace the old bearing. Sharpened the...
  11. F

    Sinister R9

    Rear shock mounts are done. Waiting for the Aluminium supplier to open after New Years for the battery case. Waiting for the machining to be complete on the rear drop outs. Waiting for the MXUS (DHL HK is crap). Paying $10 a day for parking and the weather is sensational riding. Waiting....
  12. F

    kWeld - "Next level" DIY battery spot welder

    I forgot to say thankyou. Thankyou Tatus1969, keep doing what your doing you are awesome in a world of BS ! Takes about 20 minutes to assemble, I don't have any super glue, so I haven't done the case. The case is clear, it's just got a blue protective coating on it. Really well made piece of...
  13. F

    kWeld - "Next level" DIY battery spot welder

    HI, I paid over $90 Aud for shipping or 23% of the cost of the kit. It left on Monday and it arrive AM today Thursday on the opposite side of the planet, in the most remote city on earth. UPS rocks, DHL has splintered and gone to the dogs. The board is absolutely beautifully made. My only...
  14. F

    kWeld - "Next level" DIY battery spot welder

    Hi, I just bought this one from this seller. RERASI Store https://www.aliexpress.com/item/4000325459892.html I got this one because the bus bars are at 90 degrees to the one I posted earlier so I believe it will be a better "hand hold". There are only two sellers on Aliexpress. I asked the...
  15. F

    Sinister R9

    Batteries have been an ongoing dilemma , I didn't want the bike to be as heavy as the old one and I didn't like the look of what I did last time. https://www.reddit.com/r/electronic_cigarette/comments/ba2gli/bench_retest_results_molicel_p26a_2600mah/ I ordered 120cells from...
  16. F

    Sinister R9

    Hi, I recently had my bike stolen after 5 years of building and tinkering, 24 September 2019, Perth Western Australia. It was in the best "tune" I had been able to get and I really loved riding it, I have so very few pictures and determined to remedy that with this build. This is the...
  17. F

    Used high drain 18650 cells for sale Melbourne AU

    Subscribed
  18. F

    kWeld - "Next level" DIY battery spot welder

    Happy 2020 everyone, I've spent most of my day reading through this thread when I should be working..... I've just completed order of a full kit and laser cut case, if for no other reason, the support and the work that has gone into this thing is extraordinary. I am inspired and very...
  19. F

    Reading data from my sabvoton controller

    HI Guy's, This is really awesome work. Can I please please encourage you to use git hub, at the moment the links slothorpe has put up are not accessible. I just used this guide to setup the two repositories I have shared in this post. I used git before, I found this guide just seemed to...
Back
Top