Search results

Date Relevance Most replies

  1. C

    Ebike Controller Took A Crap suddenly

    UPDATE: Apparently I went to test it this morning and motor didn't spin at first but now it does.
  2. C

    Ebike Controller Took A Crap suddenly

    So the other day I decided to take out a 1 of the 2 shunts that my 48v to 72v controller had to cut my amps to 20 amps rather than 40 to test and see if my range would improve on my batteries and it did. I was able to ride into another county on 1 charge and all was working fine, even after the...
  3. C

    Suggestion to make my Ebike look nicer?

    I got aq self sealing tube with good tire on front wheel so I shouldnt have to worry about anything right now as long as i am on pavement and not gravel or the shoulders where there is a lot of debris
  4. C

    Suggestion to make my Ebike look nicer?

    Also the front hub is welded to the forks, so far it's doing well. I had to welded it cause the threads on the axle are stripped.
  5. C

    Suggestion to make my Ebike look nicer?

    Are there other bikes with full suspension? Cause where I am in Michigan, the roads are terrible and there is cracks and holes in the roads everywhere. I rode on a no suspension bicycle before and it is horribly uncomfortable.
  6. C

    Suggestion to make my Ebike look nicer?

    hey anyone got any suggestions to make my ebike look nicer? I have it working and everything is hooked up and working right, I have it on a full suspension bike frame and so far so good, but I am wondering on what I could do to make it look more nicer mainly for where the wires come out the...
  7. C

    One of my Multistar Lipos is draining too quick than others

    Look at this on eBay http://www.ebay.com/itm/262893545999 Would that be a good battery to use for my Ebike rather than those lipos and I can only charge one at a time.
  8. C

    One of my Multistar Lipos is draining too quick than others

    Well I went for a ride toiday and yup you guys were right one of the cells bursted. The other might still be good SO if i am careful I can make it a 3s pack and throw away that bursted one.
  9. C

    One of my Multistar Lipos is draining too quick than others

    yeah, I would like to have decent range as long as i can go for a cheap price, preferably around $300 at most. I have a 40 amp controller and 44.4v nominal voltage used to have 60v nominal until cells went bad and wont hold a charge anymore. 10ah so if I do the math just right 50.4v x 40 amps =...
  10. C

    One of my Multistar Lipos is draining too quick than others

    Okay So I have 3 Multistar 4s 10ah lipo packs and on the third one the sides are fatter than the others and for some reason Cell #1 was drained to 2.8v and all the other 3 cells were at 3.5 to 3.7v, any idea why the first cell drained too quicker than the others? Should I try to balance charge...
  11. C

    How Do I limit my speed or watts for more range?

    yep figured it out and i hooked it to a switch that i can simply flip back and forth on my handle bars
  12. C

    How Do I limit my speed or watts for more range?

    So like black to Pink or black to Grey and I should be good?
  13. C

    How Do I limit my speed or watts for more range?

    also is the three speed dial the red 3-pin connector with the Pink, Grey and black wires?
  14. C

    How Do I limit my speed or watts for more range?

    could you possibly do an example with the image with Paint or something or tell me which wire goes to which cause i dont want to frock anything up since I am using Lipo now.
  15. C

    How Do I limit my speed or watts for more range?

    Hey so I wanna do some range tests with a speed limiter with this controller I am using, i already did full throttle test with the LiPo batteries i got but i only get about 10 miles per charge at 30 to 35 mph so I wanna limit the speed or watts and it says in the diagram there is a power 350w...
  16. C

    72v 40a 1000w hub motor Test Ride Spring 2017

    Here is the video of my ebike earlier today how well it performs on 72v at 40 amps. Top speed was 41 mph in the first half of video then had slowed down a little to stay the speed limit of 35 mph going into town https://www.youtube.com/watch?v=ujzAo04fl2g
  17. C

    Throttle wont send power to motor all of a sudden

    I replaced that resister, slapped some hot glue on top of that chared wire coating spot and its running again. So far so good
  18. C

    Throttle wont send power to motor all of a sudden

  19. C

    Throttle wont send power to motor all of a sudden

    Here are some pics of what my controller looks like and where the burnt spot on it is at.
  20. C

    Throttle wont send power to motor all of a sudden

    i mean the metal part on resister must of touched the wire cause coating of the wire must of been melted off then it made contact and arced out, i was riding fine thursday and then friday it wouldnt work and turns out that burnt out or something and it wont do shit since
  21. C

    Throttle wont send power to motor all of a sudden

    From the looks of it it looks like the resister touched the thinner red wire which activates controller with either a switch or directly from power +
  22. C

    Throttle wont send power to motor all of a sudden

    The motor wires on mine are pretty good size along with the power - and power +. Also i opened it up and looks like a resister burnt out
  23. C

    Throttle wont send power to motor all of a sudden

    would you know of any controllers that would work with my ebike kit whichi s this? That are above 50 amps?
  24. C

    Throttle wont send power to motor all of a sudden

    well it turns out that the inside of my controller has a burnt and fried electrical smell and its very bad too, might be why it wont work right. :( great another $40 to put towards the Ebike
  25. C

    Throttle wont send power to motor all of a sudden

    So yesterday my ebike was running fine and i let batteries charge over night. I have 12s lipos 10c 10ah multistars, well now the bike is deciding not to run at all today twist the throttle nothing happens, i checked all the soldered connections and connectors and they are all connected properly...
Back
Top