Search results

  1. P

    Power cuts off because of cold weather?

    Thank you all for your help. For now I am just giving it enough throttle to go up to ~15mph (on the flat) and I will check the connections between the controller and the battery pack to make sure they are as they should be.
  2. P

    Power cuts off because of cold weather?

    After the bike has been in the cold garage for 8 hours, if I raise the back wheel and give full throttle, the power doesn't seem to cut off (I tried that on/off for a few seconds at a time for 5-10 minutes). And afterwards when I am riding the bike and give it a little throttle (enough to do...
  3. P

    Power cuts off because of cold weather?

    Unfortunately, I can't. The battery pack is too big and too heavy to carry around. Taking it off is very difficult too.
  4. P

    Power cuts off because of cold weather?

    I am all thumbs when it comes to e-bikes so testing it on my own is out of the question. Given your experience, does this sound like a normal thing for an e-bike/controller/battery pack that's been left out in the cold?
  5. P

    Power cuts off because of cold weather?

    I have a 1500w e-bike with a 60v sinewave controller and a 60v/18ah battery pack. Sometimes when I am using throttle-only (no pedaling), power cuts off and the bike doesn't turn on unless I connect it to the charger. This only happen when I use the bike after I have stored it in a cold...
  6. P

    How to disable cruise control? (KC-LCD3 )

    I posted on pedelecs.co.uk and one guy said that if it has the looped Blue wire then Cruise is set in auto mode and can not be disabled which means I will need to access the controller and disconnect it. The C7 option only works if it is unconnected. Thanks all for your input.
  7. P

    How to disable cruise control? (KC-LCD3 )

    I can't check without taking out the controller and battery from the frame. The shop that built the bike for me made the wires in the controller inaccessible but I am 99% sure it does have a blue loop connector as shown in the figure below (not my figure, found it on pedelecs.co.uk). Assuming...
  8. P

    How to disable cruise control? (KC-LCD3 )

    I have an e-bike with the KT-LCD3 meter. I tried to disable cruise control by setting C7 to 0 but it doesn't work. C7 is set at 0 but cruise control still kicks in. Anyone knows how to fix this? Thanks
  9. P

    Disabling pedal assist (KT-LCD3 meter)

    Thanks for the reply and happy new year! I am a bit confused with the terms "disabling PAS" and setting PAS to "no assist". If I understand correctly, setting C3 to 0 means that the motor is active only when I use the throttle? Pedaling has no effect on the motor?
  10. P

    Disabling pedal assist (KT-LCD3 meter)

    Hi all I am using a KT-LCD3 bicycle meter and I want to disable pedal assist. How do I do that? I have the manual for KT-LCD3 but can't find the relevant bit.
  11. P

    Need a replacement conversion kit

    Hi all I need a 1500w rear hub wheel and a 60v controller (model no KT60SVPRK-SLS02G or similar). My battery pack is 60v/18ah. Long story short, I got an e-bike from an online retailer in the UK who isn't in business anymore and they said they purchased the conversion kit from...
  12. P

    Need a replacement conversion kit

    My controller is probably at the end of its life and I might have to replace the rear wheel hub motor too. Could you recommend another conversion kit? (1500w hub motor, 60v sinewave controller (model KT60SVPRK-SLS02G), see attached pictures). Thanks
  13. P

    Bike shop that repairs/services e-bikes in the UK

    Hi all I have an aging e-bike (2.5 years old) and the rear wheel hub motor has a couple of broken spokes and some loose ones. As a result, the bike feels very unstable and I am not riding it anymore. The retailer who sold it to me has gone out of business, the local bike shops, Halfords and...
Back
Top