Search results

Date Relevance Most replies

  1. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I frequently get error 02 (which is a torque sensor error). The error does not appear when I power the bike on (without weight on the pedals) but when I first apply weight to the pedals. I am allowing enough time for initialisation and the torque sensor upper and lower limit is calibrated...
  2. G

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    I’ll give that a try, my wife’s bike often runs without pedalling and I was about to change the controller to see if that was the problem. But will clean the torque connector first to see if that makes a difference. I also get an error 02 sometimes (torque sensor error) so hopefully all the...
  3. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Thanks for the temperature bug fix, Loaded and seems to working good now.
  4. G

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Having a similar issue. I was using the Emmebrusa firmware with the VLCD5 which is really nice, but wanted to get the 860C display onto my bike. I had an issue with the start power (Ver 1) which was mostly resolved by enabling assist without pedal rotation (noted by mctubster) but I do find it...
  5. G

    Tsdz2 firmware open source adapted to vlcd5, vlcd6 and xh18

    Just loaded the OSF using the VLCD5 which is great by the way. In reading the setup documentation regarding cadence and torque caibration, I am little confused about the “ADC conversion factor calibration”. I actually notes in the documentation that it is not essential but would still like to...
  6. G

    New "TSDZ2 Torque Sensor Central Motor"

    You noted that you used OSF with the Vlcd5 On the 36V motor? Can you send a link to that firmware please
  7. G

    New "TSDZ2 Torque Sensor Central Motor"

    Looks similar to the setup I used the other day to program my 860C. Are you providing seperate power (36V in my case) to the display? The USB device will not provide this by itself. I made a lead which added a connection to my 36V battery to power display
  8. G

    New "TSDZ2 Torque Sensor Central Motor"

    I put the same connector as the 860C (I think it is a higo) onto my VLCD5 so that I can quickly change between stock and OSF firmware. Took a while as the colors and pinouts are different but makes it really easy to test different settings and switch back to stock firmware when I need to
  9. G

    New "TSDZ2 Torque Sensor Central Motor"

    I put the same connector as the 860C (I think it is a higo) onto my VLCD5 so that I can quickly change between stock and OSF firmware. Took a while as the colors and pinouts are different but makes it really easy to test different settings and switch back to stock firmware when I need to
  10. G

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    I put a 5 pin connector the same as the 860C display on my VLCD5 so that I could easily swap between stock and OSF firmware, so I can tell easily if there is a difference in the startup power between the two firmwares when I change any settings. Still working on it
  11. G

    New "TSDZ2 Torque Sensor Central Motor"

    Yeh, I just posted the same issue on the other forum (OSF with 860C display). Tried a few things but no luck getting that standing start power improved. Everything else is great, so hoping a resolution can be found. I have put back the stock firmware for the moment, as I live on a hill and...
  12. G

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    Hi Loaded the 1.0.0 with 860C display and all the torque calibration setting etc. Everything works great except sufficient power from a standing start. There seems to be a significant difference in the start up power from the stock firmware and 1.0.0. I live on a hill and with the stock...
Back
Top