Search results

Date Relevance Most replies

  1. G

    Bafang 860c display - Adding taillight

    I see what you mean, was only thinking about keeping cabling to a minimium. Are you familiar with TSDZ2? Guess I need to install my Y-coupler then to get power to the front light? What is the voltage and max current ? I can switch the light ON/OFF from my display (using OSF firmware)?
  2. G

    Bafang 860c display - Adding taillight

    I`m consider adding a taillight to by 860C display, but haven`t found spesifications... What is the output voltage and what is the max watt you can pull from the output? Thank you!
  3. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Ahhh… so you are using the same firmware on P860C ?
  4. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Thank you, looks like it has some a new 860c display with a new connector and the price has gone up on the old one? Need to look into having a spare...
  5. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Thank you for feedback! I understand, no hit that i know about… I had a spare display so up and running again. How good is the quality on the display? Is these rear? Or should I get a new spare display?
  6. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I have got problem with my display, the bike have worked fine for 2-3 month now... See attacthed photo, what can cause these ? what can I do? I have a spare display, is it a way I can backup the old display and download the backup to the new display?
  7. G

    TSDZ2 full suspenion bracket

    I have a problem that bolt unscrew on left side. The bolt holdning the arm/axis in place…. I have tried to add locktite without sucess… Anybody?
  8. G

    TSDZ2 gear ratio

    Okey, So stress om the TSDZ2 is not a concern? I was thinking it could working easier if I had more ratio.
  9. G

    TSDZ2 gear ratio

    I have a full suspension bike with TSDZ2, and have a rear cassette 11/42. I’m planing to use the bike to work, but also offpist on tracks… My weight is 110kg + 5battery Should I have more teethd in rear?
  10. G

    TSDZ2 mid drive with 860C, 850C or SW102 displays only -- Flexible OpenSource firmware (Casainho code only)

    OSF V20.1C.3 I have a question when it comes to set MIN and MAX torque. I have placed my foot and my weight on the left pedal (horizontal) position, when I monitored the torque reading in the menu under the variables I think it was I got 287 or something, then I updated the "Torque ADC max"...
  11. G

    Battery backpack

    Thank you :)
  12. G

    Battery backpack

    Thank you :) Have recived all the parts I need now :) I have a question for you. How have you ended up having the cable from the seat and into the backpack? Photos? Thank you :)
  13. G

    Battery backpack

    haha good point :) but I`m not negative to have in the backpack, I can see it common to have a spare battery in packpack made for battery (protection of back) and also many report improve weight distribution when cycling offroad. hehe So I`m not negative, if its hopless then I will need to...
  14. G

    Battery backpack

    I found two cabels: 01: This cable was not marked with size, but measured it to 2,7mm (diameter)... It has more isulation aorund so it`s stiffer.... 02: These cable is 10 AWG and isulation is thinner.. maybe more flexible ... ?
  15. G

    Battery backpack

    I understand, don`t have the option to have it on the frame, then I must go for a smaler battery :) Will start with a good packpack with good support first and then take it from there.. hope I get used to have it on the packpack :) I walking with packpack that are heaveier so I don`t think it...
  16. G

    Battery backpack

    Thank you for advice. I have already XT90 connetors, the battery shall have build in protection against short circuit? https://www.ebay.com/itm/313476072320?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Cable 10 AWG / 6.0 mm^2 thank you, will look into what I have alreday. Do you...
  17. G

    Battery backpack

    Because of my frame I need to have the battery in backpack. I`m planning to use a backpack made for spare battery, so my back is protected etc... My questions is what option to do you have for cabling the battery to the frame? Different cabels to use ? Different cable routing to choice ? I see...
  18. G

    TSDZ full suspension mount it as buffang

    Thank you all, I'm thinking using loctite on the nute?
  19. G

    TSDZ full suspension mount it as buffang

    Thank you :) I`m thinking not doing anything and just turn it against the front tube... ?
  20. G

    TSDZ full suspension mount it as buffang

    I also talked with Eco Cycles they also advise me to the same, but use som rubber inbetween to take away vibration, have you also done that? I have seen some other report that people have got the a crack in he housing... How many watts are you using ? Maybe size of the front sprocket has...
  21. G

    TSDZ full suspension mount it as buffang

    From what I understand Buffang has not any problem to be mounted on a full suspension frame where the rear arm is swinging... correct? I see some place the TSDZ motor upwards so its laying on the frame.. but I see people report cracks after a while.. I guess it get to much torque here its not...
  22. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    Hi, I have tried to masure the voltae on the cable, but how can I use the multimeter to figure out "what is what" ? Example RC and TX shall not be 52v there ? Do you have a picture or overview what colours you was ending up using ? Thank you !
  23. G

    TSDZ2 OSF for all displays, VLCD5-VLCD6-XH18, LCD3, 860C-850C-SW102.

    I have bought TSDZ2 (throttle version) and 860C display and have problem to get them to work together..... Firmware used: TSDZ - TSDZ2-v20.1C.3-860C-NEW.hex 860C - 860C_v20.1C.3-bootloader.bin Battery: 52v Background information: 1. I have been able to flash both TSDZ and 860 display without...
  24. G

    New "TSDZ2 Torque Sensor Central Motor"

    I have bought new TNDZ2 (throotle version) and 860 display and flashed both with newest firmware TSDZ2-v20.1C.3-860C-NEW.hex and 860C_v20.1C.3-bootloader.bin. The display boot up fine when I have it connected to the bootloader box, but not the TSDZ2 controller.... I have double checked my...
  25. G

    New "TSDZ2 Torque Sensor Central Motor"

    My fault, I download the bin file wrong....
Back
Top