60v Scooter Settings Question

[detrailers]

Trying to figure out how to set the module on my scoot. Please check out my vid and let me know if you have answers. BTW its a 60v w/ 2000 watt motor
UPDATE I think the volt setting is low voltage cutoff and from what I've read, 46 might be low for a 60v batt. Still not sure what the other setting should be set at but ive read a bit that that might have to do with calibrating the speedo...

https://youtu.be/yoDng9Beiz4

 

[larsb]

I'd say first check the brand of the controller. Then google it
then ask the seller

Only then ask here but with the full name of controller, picture of controller markings and all info you have on the scooter.. Otherwise it's impossible for someone to help you

I'd bet a tuna sandwich that the parameter is the low voltage cutoff like you stated. When you increase it you're putting controller closer to low voltage cutoff --> battery represented as less full on the screen.

P02 i'd guess is phase current delivered.

 

[detrailers]

Couldn't find the brand, to Google it and seller didn't know brand name, that's why I posted the video. Instructions that came with it were worthless, again why I posted the vid...

You are correct, it is LVC so ill send you your tuna sandwich but can't say it will be fresh. Now if I can just figure out the 2nd setting. I believe its motor pole conversion, which is maybe same as what you said, but have no idea what it should be set at.

 

[larsb]

Never seen a controller that wasn't marked. Have you checked..?
Upload the manual or pictures of it.

What is range of p02? What happens if you set it lowest & highest?