861 LCD and no pas setting...

[dgncsk]

hello dear friends. i bought a controller and lcd panel for my ebike to upgrade it. i bought this controller from aliexpress. model is 861 type lcd. 36 volts.

it is connected and working. hall sensor has blinking led on it so it is operational. throttle is connected and operates the motor as i twist it. bu pedal assist does not work. it won't do anything.

i entered the menu i adjusted every setting but no luck. weird thing is there is no P05 setting on menu! it jumps from p04 to p06.

menu has 14 different parameters. ( if we include P05)
you can see the pdf below. this is very same LCD. it is familiar to you as far as i know.

http://wooshbikes.co.uk/2014/support/zp-LCD.pdf

any ideas?

i recorded a very short video clip.
[youtube]57KklEQOk04[/youtube]

 

[d8veh]

Try turning the pedals backwards to see if it works. If it does, you need to flip the maget disc.
You're not on levrl zero are you?

 

[dgncsk]

hall sensor is single direction type iwht led on it. i think i will try with a standart 8 magnet hall sensor and its disk.

is there a such situation that a controller came with pas connector but no pas function??

pas levels makes no differece when selected.