8s LiFePO4 BMS recommendation

[lettersize]

Guys, please recommend reliable BMS for 8 x 100ah calb cells pack .
Continuous current 30amp, peak 60amp to be used with 24v 50amp brush motor.

I've read lots of positives for bestechpower, is that the best way to go?

Also are there BMS with screw terminals? so soldering is not required.
It's not critical, but will be more convenient to work with screw terminals.

 

[KarlJ]

best i know of is www.ev-power.com.au

BMS units balance on their own = win
single wire trips the lot if undervoltage or overvoltage
must be used with relays to do the tripping.

decent specs available too vs nada and hope they will balance.

Last - balance pack manually before getting started 30AH out of whack can take months to fix with any BMS that heats off a couple of watts at a time.

Karl

 

[circuit]

Emus BMS is good for CALB cells, also feature-rich.