I have a sabvoton 72200 paired with a 200a cont battery (350 peak) qs205 5t motor and I have been running the bike for a while now at maxed controller settings pretty much, battery bms seems to agree with a 210 amp draw during acceleration. Its plenty fast and fun but it feels like its missing some responsiveness. Power seems to ramp up gradually, only after ~2 seconds i see full current draw and at that point its already at max speed, then starts to drop off after that.
The only setting i haven't messed around with is the current kp setting which is at default 300. I have seen one person mention 999 for sub 10 inch motors which a 205 is, but was curious if anyone else messed with this setting before i turn it up and and up in a ditch/tree/wall or blow the controller.
Thank you for your time, have a great day.
The only setting i haven't messed around with is the current kp setting which is at default 300. I have seen one person mention 999 for sub 10 inch motors which a 205 is, but was curious if anyone else messed with this setting before i turn it up and and up in a ditch/tree/wall or blow the controller.
Thank you for your time, have a great day.
