Hello bikers
Working on my fatbike time to time, upgrading to a bac 855 controller on my bbshd. Got it working in the garage after alot of headache, turned out the harness was very bad built and 4 pincabls came loose when troubleshooting.
Took it off and carefully tried to repair / solder on the pins again, but my problem now is to locate where the speed sensor should connected on the 24p jst connectors as its not clarified on the table and i didnt notice when it fell out.
I attach the pinout table, guess it should be digital input, but neither worked.
Ny help is greatly apprecicated.
Working on my fatbike time to time, upgrading to a bac 855 controller on my bbshd. Got it working in the garage after alot of headache, turned out the harness was very bad built and 4 pincabls came loose when troubleshooting.
Took it off and carefully tried to repair / solder on the pins again, but my problem now is to locate where the speed sensor should connected on the 24p jst connectors as its not clarified on the table and i didnt notice when it fell out.
I attach the pinout table, guess it should be digital input, but neither worked.
Ny help is greatly apprecicated.