stancecoke
100 kW
- Joined
- Aug 2, 2017
- Messages
- 1,840
We have developed and tested a module based on a STM32 "bluepill" board, that let's you drive your BionX motor without a BionX console and without a BionX battery. The first prototypes are soldered from various modules on a perfboard.
Everything is available as open source in english on github, code, schematic and wiki
Discussion in the german forum:
https://www.pedelecforum.de/forum/index.php?threads/bmt-bionx-motor-mit-no-name-akku-und-kunteng-display-betreiben.79599/post-1516083
[youtube]gEE0aXB8e7c[/youtube]
Now we are looking for someone, who can design a PCB layout, where the modules can be soldered to, without doing all the wiring manually, or even design a layout with the electronic components itself placed directly on the PCB ready for ordering at JLC or similar service providers.
I hope we can inspire someone to help.
I tried to do a PBC layout myself several years ago and decided, that this is not my main talent
regards
stancecoke
Everything is available as open source in english on github, code, schematic and wiki
Discussion in the german forum:
https://www.pedelecforum.de/forum/index.php?threads/bmt-bionx-motor-mit-no-name-akku-und-kunteng-display-betreiben.79599/post-1516083
[youtube]gEE0aXB8e7c[/youtube]
Now we are looking for someone, who can design a PCB layout, where the modules can be soldered to, without doing all the wiring manually, or even design a layout with the electronic components itself placed directly on the PCB ready for ordering at JLC or similar service providers.
I hope we can inspire someone to help.
I tried to do a PBC layout myself several years ago and decided, that this is not my main talent
regards
stancecoke