ZenaWarrior
1 mW
Having 2 identical motors and controllers and 4 x 72v 30 amp batteries, I'm using both motors & controllers (Votol 100) and 2 batteries. Normally on the scooters 1 motor 1 controller 2 batteries. I did bench testing with 1 battery connected to 1 controller, but I did connect both batteries as well with a + and - cable. Both motors ran the correct way (may want to be able to reverse, just don't know, not important though) and I did it to use same amount of power from both batteries. Am I correct in that, to ensure both motors run at same speed.
