gromike

I prefer a bike that coasts freely, so I never cared for the way the large direct drive motors cog when rolling w/o power. The small...

What would be a good candidate for a road ebike conversion. I have a 1988 Honda Hawk that's just sitting there, A single swing arm...

If you're talking about spreading a front suspension fork to force fit a hubmotor axle's wider O.L.D. (Over-Lock-nut Distance)-- Not a...

Oh, I have a 2014 Grom, and if you have found a hub wheel motor that fits in the dropouts of the Grom, and matches to the brake rotor of...

Well, too much pressure from the strap between your legs might lead to a crash as well. Sorry, forgot that flip flops is the American...

And I thought you were talking about underwear! You're lucky to have toes! Most people new to ebikes have no experience at coming off a...

Oh my. A 250w 36 Tsdz2? No speeding tickets on that bike.

If the existing front derailleur cannot swing out far enough, you might look at a direct mount derailleur which would screw into a clamp...

Ah, riding stoned isn't all that bad, but riding drunk is deadly. Riding on LSD, though, can be quite interesting--if you manage to not...

The 36v 250w hub motor and 10Ah battery sounds like the specs for my Huffy Oslo. That bike was below $400, shipping and tax included...

That's not been my experience. It all depends on your personal geometry. There are torque sensing hub motor installations, and yes they...

Switch any two phase wires with each other. That's how it's done on 3 phase AC motors, which is basically what a BLDC is.

I bought 2 chainrings for my Tsdz2 from the vendor at time of purchase. I had to shim the derailleur over to get it to shift to the big...

Rohloff with TSDZ2? When you go to the bar, do you ask for the most expensive tequila they have, mixed with whatever fluid is sitting...

I know a guy that converts bikes for people using these motors. He's had good luck, and his customers are happy. Though his bikes are...