rockstar195
100 W
- Joined
- May 13, 2019
- Messages
- 166
Here is the situation: The hub motor wiring harness is kissing the brake disc fasteners and needs improvision to minimize contact. This is a QS V3 5kw motor from www.em3ev.com. I emailed them and they said: " If you using some zip ties can help or some tape if the fabric is bulging or has any frayed edges." I might grind down the heads of the fasteners, drill countersink holes into the brake disc so that the fasteners are recessed further away from the wiring harness, OR might orientate the wiring harness towards the rear and grind the dropout (which I'm trying to avoid) for the harness to have a little bit more room.