Choosing Parts for eBoard

[Pantologist]

Hey guys, I've been researching some parts for my single motor, Loaded Vanguard eBoard. I really dig the design of the Boosted Board and wanted to make it off of one. Since you guys have lots of expereience, I wanted to ask for tips on my list of parts that I have currently picked.

My parts list

Motor: Turnigy SK3 - 149kv

ESC - Ollin Board VESC

Battery: 12s1p A123 LifePO4 Cells - 38.4v 2.5A

BMS: Still deciding on something from BestechPower for 12S. I'm not sure what the constant current and voltage is going to be.
Here are some options I've looked at:
http://www.bestechpower.com/384v12spcmbmspcbforlifepo4batterypack/PCB-D189.html
http://www.bestechpower.com/384v12spcmbmspcbforlifepo4batterypack/BMS-D163.html

Controller: GT2B(Some brand) with the BadWolf mod

Motor Mount: Enertion's Single Motor mount

Charger: Something decent that charges around 40v 2A I am guessing. Battery can charge max up to 10A but recommended 2A.

If you guys can give me some pointers, suggestions or tips on how to make this better before I buy everything, I would appreciate it.

Thanks

 

[joop1987]

If you are using the vesc, just get the Niko Kama wireless remote. Ollin sells the cable for it.

 

[Pantologist]

If you are using the vesc, just get the Niko Kama wireless remote. Ollin sells the cable for it.

Does the GT2B lack that many features compared to a nunchuck?

I only need forward, brake and reverse.

 

[joop1987]

It's less work getting it to work. 3D printed cases are not professional looking. The selling feature of the Kama for me was cruise control. Either one will work fine.