docnjoj
1 GW
Well now it gets weird! I went back for a final test to try to get P4 to 0 and low and behold, the Advanced stuff will not come up! However, when I press the lower button, the wheel spins and the little man comes on! The wheel spins very slow and roughly, like the hall/phase may be out. The next step is to try it without the meter but connect the correct wires (1+2 and 3+5) and see if the meter is faulty. It does have an ignition wire (blue) so it may control the on/off for the controller! Stay tuned for more trips down the rabbit hole!
otherDoc
otherDoc