torqueboards
1 MW
Here's a new build/board I was testing to test mainly the battery packs (12S3P 12S 7.5ah). Pretty simple build. Climbs up hills like butter.
Mechanical Parts
Deck/Board - Arbor 2015 Bamboo Axis 40"
Trucks - SurfRodz Hex TKP w/ 70mm Extended Axles
Wheels - 90mm ABEC 11 Flywheel Clones Neon Green
Drive Wheel Pulley - 36T 15mm
Motor Pulley - 16T 15mm
Belts - 280mm 15mm width
Electrical Parts
ESCs - Dual 12S TorqueBoards ESC
Motors - Dual 6355 230KV
Remote Controller - TorqueBoards 2.4ghz Mini Remote
Battery Pack - 12S3P 7.5ah Samsung 25R 30A/80A Peak
Y Connectors - For Dual ESCs + Dual ESC Signal Wires.
UBEC - 12S UBEC
Here are the photos.
Just a few other additions..
Better simple enclosure.
- 3mm ABS enclosure which will cover the bottom and protect against any rocks and such just make it a little more durable.
- Will add in Silicone Rubber Sheet and will bolt it down. The rubber sheet should make it completely waterproof besides the power button.
- Could also velcro part of it so you can open/close.
Add a grab handle.
- Board is much longer so it's definitely harder to hold. I don't like holding it by the board itself since the grip tape can ruin clothes.
Hex TKP Trucks are awesome.
- The hex TKP trucks aren't too pricey if you get a bundle w/ a deck and they turn smoothly. Buying another set as we speak and might switch out to them completely for all my boards.
Mechanical Parts
Deck/Board - Arbor 2015 Bamboo Axis 40"
Trucks - SurfRodz Hex TKP w/ 70mm Extended Axles
Wheels - 90mm ABEC 11 Flywheel Clones Neon Green
Drive Wheel Pulley - 36T 15mm
Motor Pulley - 16T 15mm
Belts - 280mm 15mm width
Electrical Parts
ESCs - Dual 12S TorqueBoards ESC
Motors - Dual 6355 230KV
Remote Controller - TorqueBoards 2.4ghz Mini Remote
Battery Pack - 12S3P 7.5ah Samsung 25R 30A/80A Peak
Y Connectors - For Dual ESCs + Dual ESC Signal Wires.
UBEC - 12S UBEC
Here are the photos.
Just a few other additions..
Better simple enclosure.
- 3mm ABS enclosure which will cover the bottom and protect against any rocks and such just make it a little more durable.
- Will add in Silicone Rubber Sheet and will bolt it down. The rubber sheet should make it completely waterproof besides the power button.
- Could also velcro part of it so you can open/close.
Add a grab handle.
- Board is much longer so it's definitely harder to hold. I don't like holding it by the board itself since the grip tape can ruin clothes.
Hex TKP Trucks are awesome.
- The hex TKP trucks aren't too pricey if you get a bundle w/ a deck and they turn smoothly. Buying another set as we speak and might switch out to them completely for all my boards.