DZ41 Display UART Tongsheng TSDZ2 internals

[dgc]

Hi there all, anyone opened up one of these DZ41 Display for the TSDZ2(B) mid-drive, as it's for the Tongsheng it comes with 6 pin connector, I wonder before I butcher the display cable if all 6 wires are in there as it it showing the middle 6 pin which could mean all 6 wires are there and I can graft in brake sensors as some Tongsheng cables / plugs only have the 5 pins as the six pin and wire is for the brakes when used on a 6 wire VLCD5 cable.

 

[clarke]

I would be petty sure all 6 wires will be there

 

[dgc]

Will bite the bullet as I now have a spare DZ41 Display and open it's cable up, have always like brake sensors as one can hold the controller with "power off" at traffic lights and junctions but pressure on the pedal ready to go.