ecrazyman 72V 45A - can it be programmed?

Wattever

10 mW
Joined
Nov 23, 2010
Messages
28
Hi,

I have an ecrazyman 12 FET controller.

the board is EB312-AS-2.
I tried programming it with a LYEN programmer and XPD, but it just sits at "waiting for controller ready".
The chip is GPM8F3108A-QL011.

Did anyone program those?
 
Have your got the cabling right. I had a similar problem with using an old Lyen programming cable not suited to the new EB3xx controller.

An adapter fix the problem.
http://endless-sphere.com/forums/viewtopic.php?f=2&t=45545
 
Thanks for answering so fast,

I don't think I have the new version of the controller, its actually an old one:
I will try your suggestion when I am back home.

here are some pics:
 

Attachments

  • IMAG0621.jpg
    IMAG0621.jpg
    68.7 KB · Views: 2,030
  • IMAG0622.jpg
    IMAG0622.jpg
    44.4 KB · Views: 2,030
OK, I have connected the yellow wire and the white wire. now, when I press apply on the xpd it says "Upload failed: invalid reply byte XX, XX is changing every time I do this.
 

Attachments

  • upload failed.JPG
    upload failed.JPG
    39.5 KB · Views: 2,583
OK, success, I used Zombies software and connected sk2 to tx as in gwhy!'s picture http://www.endless-sphere.com/forums/download/file.php?id=103777 and it works.

Thanks a lot
 
Great. Glad it all worked out.

My advice, make sure you keep the adapter cable and label it somehow. I didn't and had to re-learn all this.... twice. :lol:
 
Wattever said:
OK, success, I used Zombies software and connected sk2 to tx as in gwhy!'s picture http://www.endless-sphere.com/forums/download/file.php?id=103777 and it works.

Thanks a lot

Hi,

I also have a EB312-AS-2. I also have an error message "upload failed.........."

where can I find Zombie software ? what is it?

thank you. :wink:
 
Back
Top