LightningRods
1 MW
Well look at what appeared at my shop's door today:
Blair B. saw my thread on the Qulbix Raptor swingarm mid drive and decided that he wanted one- on an Electric Enduro Bike frame. Since he is the fourth person that has asked for this combination, and he was ready to step up with a frame, I decided that it's time for another project. The Qulbix is just about a wrap, the FUTR Beta went quick and is basically done, I'm ready.
The Qulbix frame and swingarm are similar but not identical to the EEB.
The Qulbix has it's BB attached to the main frame where the EEB has a floating BB attached to the swingarm. The Qulbix has a 165mm rear dropout, the EEB measures out at 154mm. The Qulbix has horizontal dropout slots for chain tensioning, the EEB has vertical dropouts. So I won't just be moving the Qulbix parts over to the EEB.
Blair B. saw my thread on the Qulbix Raptor swingarm mid drive and decided that he wanted one- on an Electric Enduro Bike frame. Since he is the fourth person that has asked for this combination, and he was ready to step up with a frame, I decided that it's time for another project. The Qulbix is just about a wrap, the FUTR Beta went quick and is basically done, I'm ready.
The Qulbix frame and swingarm are similar but not identical to the EEB.
The Qulbix has it's BB attached to the main frame where the EEB has a floating BB attached to the swingarm. The Qulbix has a 165mm rear dropout, the EEB measures out at 154mm. The Qulbix has horizontal dropout slots for chain tensioning, the EEB has vertical dropouts. So I won't just be moving the Qulbix parts over to the EEB.
