Technical datas:
- 100 kW peak motor power, 62 kW continuous power
- Induction, PMSM and BLDC motor types
- Support different types of rotor position sensors
- Galvanic isolation between control and power signals
- Battery voltage range 30-125 V
- Continuous motor current 500 Arms, 1 minute peak 800 Arms
- CAN (CANopen) interface
- Liquid cooling
- Dimensions 280 x 205 x 65 mm, weight 4,9 kg
I changed now from Kelly Controls (KHB14601C & KLS14401) to Emsiso controller manufacturer to feed my QS Motor 273 80H motor type.
So I started to make my circuit diagram drawing, how I will connect him to my system!
At the end it looks like the previous controllers before.
But with delivery of controller & CAN/USB converter, no cables where delivered.
Therefore I have to make them of my own.
- 100 kW peak motor power, 62 kW continuous power
- Induction, PMSM and BLDC motor types
- Support different types of rotor position sensors
- Galvanic isolation between control and power signals
- Battery voltage range 30-125 V
- Continuous motor current 500 Arms, 1 minute peak 800 Arms
- CAN (CANopen) interface
- Liquid cooling
- Dimensions 280 x 205 x 65 mm, weight 4,9 kg
I changed now from Kelly Controls (KHB14601C & KLS14401) to Emsiso controller manufacturer to feed my QS Motor 273 80H motor type.
So I started to make my circuit diagram drawing, how I will connect him to my system!
At the end it looks like the previous controllers before.
But with delivery of controller & CAN/USB converter, no cables where delivered.
Therefore I have to make them of my own.