First e-board build and some motor related questions

[RenDhark]

i just started to build my first e-board, but cant find any motors. Most of them are out of stock or dont deliver to germany.
im Looking for brushless motor with less than <300 Kv and around 2000W+.
The only one ive found is the Turnigy Aerodrive SK3 - 6374-192kv Brushless Outrunner Motor.
i Would appreciate any suggestions.

 

[randyc1]

Well that is a Great one !!

 

[WeeChumlee]

You are lucky, those SK3 6374 190KV are usually on back order. If you can get one then go ahead before it is gone.
Failing that, try here:
http://alienpowersystem.com/product-category/brushless-motors/63mm/

 

[RenDhark]

Thanks for the advive, i will for the SK3 - 6374-192kv.
The Turnigy 5000mAh 6S 30C Lipo Pack should be enough.
Any recommendations for a 150+a esc?