Please advise, I bought a flipsky 75100 pro controller (updated from stock firmware to 6.05) to work with a MXUS GDR FAT 1200W geared motor. After passing the motor definition, I tried to ride and the motor starts with small jabs/jerks, after which it goes normally. I tried different settings, but nothing helps. Then I decided to put a motor with a direct drive Mxus 3kw, and the behavior is similar at the start, only instead of jerks, a small tremor and no traction at the start, only when reaching a speed of 20 km there is a noticeable acceleration
(use battery 18s 66.6v)
these sounds can be heard in the video
(use battery 18s 66.6v)
these sounds can be heard in the video
