VSkudarnov
10 W
First, good news (for me
...
On the local auction I managed to buy a Gruber-assist... for $1,000
... including XC full suspension bike of my size (52cm)
on TOP components
in mint condition...
Some info on Gruber can be found here - http://www.gruberassist.com/english/product/technology/
First impressions:
- very smart Austrian design.
- very light - the bike is 12.5kg with motor. That's a large full suspension bike! Battery (30V 4.5ah) is +1 kilo
- smart controller interface - 1 button. Starts slowly, if it feels any conterforce - cuts off.
I will post more feedback and pics, when I ride it a little.
Future mods:
- Cycle Analyst, stand-alone model (already ordered) - want to see the watt consumption
- more battery!
- maybe slick tires for alsphalt trips.
Bad news: both batteries are almost dead. What are the best suggestions? I am a complete Lipo noob.
Gruber charge E300 for 4.5ah battery. No way I am going to pay that!!
I plan to go with HK Lipos. The voltage is 30V (8S) but 8S batteries are bulky and rare.
I plan to buy 6 (or better 8 ) x5000mah 4s ($30) and fit them into the saddle bag. 30V 20ah to be used at 100W should give me a plenty of range for mountain passes (Switzerland
)
How do I charge so many batteries? I have a Gruber Lipo charger (33.6V, 1.5A) - can I use that?
Or do I need 3-4 Turnigy 8S chargers for balanced charging?
Many thanks, will post some feedback once I do more kms!
On the local auction I managed to buy a Gruber-assist... for $1,000







Some info on Gruber can be found here - http://www.gruberassist.com/english/product/technology/
First impressions:
- very smart Austrian design.
- very light - the bike is 12.5kg with motor. That's a large full suspension bike! Battery (30V 4.5ah) is +1 kilo
- smart controller interface - 1 button. Starts slowly, if it feels any conterforce - cuts off.
I will post more feedback and pics, when I ride it a little.
Future mods:
- Cycle Analyst, stand-alone model (already ordered) - want to see the watt consumption
- more battery!
- maybe slick tires for alsphalt trips.
Bad news: both batteries are almost dead. What are the best suggestions? I am a complete Lipo noob.
Gruber charge E300 for 4.5ah battery. No way I am going to pay that!!
I plan to go with HK Lipos. The voltage is 30V (8S) but 8S batteries are bulky and rare.
I plan to buy 6 (or better 8 ) x5000mah 4s ($30) and fit them into the saddle bag. 30V 20ah to be used at 100W should give me a plenty of range for mountain passes (Switzerland

How do I charge so many batteries? I have a Gruber Lipo charger (33.6V, 1.5A) - can I use that?
Or do I need 3-4 Turnigy 8S chargers for balanced charging?
Many thanks, will post some feedback once I do more kms!