Heavy duty gears?

[jawnn]

Has any one see a heavy duty ITV or some kind of transmission for a motor of about 2 to 4 hp on a 20" wheel?

about 665 foot pounds/sec? chuck gave me this number, I don't know if it is correct.
http://endless-sphere.com/forums/viewtopic.php?f=2&t=19368&p=283218#p283218


I see people are working on the idea:
http://www.youtube.com/watch?v=UmptP...eature=related


This is what I may have to use 12 24 48 Volt DC Motor Etek MT/Pattern Permanent Magnet at http://cgi.ebay.com/12-24-48-Volt-DC-Motor-Etek-MT-Pattern-Permanent-Magnet-/250654056348?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a5c255f9c

 

[jawnn]

I found this chart...I think it indicates that the torque is not more than 125lb/in.

http://thunderstruck-ev.com/etek_curve.htm

So there must be some chance that an ITV or CTV would work... not that I would trust a V belt.

 

[jawnn]

Lost in my own mind