nickjs
10 W
Hi , guys just bought a new motor it's a cyclone gear less big motor for my mid drive ebike, I have previous to this been using a cyclone geared smaller motor with no problems , I connected the motor up using the same wiring combination as the small motor , the motor spins up fast and smooth in the correct direction , so I thought all is good!
Took it for its maiden ride and it has no torque at all and my amp meter Shows its not pulling any amps ?!?
Any ideas what I've done wrong?
I've used the same throttle and 35amp 48v controller I used for the old motor , just literally swapped motors and kept the same wiring using turnigy lipo 8 ah 2 p 2s
I'd really appreciate any help/ advice thanks in advance!!
Nick
Took it for its maiden ride and it has no torque at all and my amp meter Shows its not pulling any amps ?!?
Any ideas what I've done wrong?
I've used the same throttle and 35amp 48v controller I used for the old motor , just literally swapped motors and kept the same wiring using turnigy lipo 8 ah 2 p 2s
I'd really appreciate any help/ advice thanks in advance!!
Nick