Jordan325ic
100 W
- Joined
- Aug 5, 2020
- Messages
- 122
This is leftover stuff from an electric motorcycle build. Just clearing out some space. All prices are very OBO, more interested in stuff being used than sitting around.
Bestechpower HS-017 $45 + shipping. Includes bluetooth dongle, HV relays, everything shown in the pictures.
HS-017 BMS: 16S Li-ion BMS 30A charging 150A discharging（Peak current 300A ）Separate port with Canbus， with Bluetooth
http://www.bestechpower.com/communicationbms/HS-017.html
Supposedly a very high quality BMS, and fully functional as far as I know, however I could never get the software to work right on my computer. No time to deal with it, I went with a Chargery unit which has it's own dedicated screen. I have all documentation and software I will send along.
60V-12V DC-DC converter
Standard 3 wire type. No more info on it. $10 shipped
8-40V to 13.8V DC-DC converter.
Used this to bump-up my standard DC-DC converter to a charge rate that would keep my 12V aux battery charged up in an electric motorcycle build. No longer needed. Standard 10A Chinese design, never had a problem with these. $15 shipped.
https://www.amazon.com/gp/product/B09T9XJ4ZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Motorcycle twist throttle / handlebar assembly. $10+shipping. Came in a QS138/Votol150 kit. No need for it, but tested fully functional.
DKD Dashboard- $35+shipping
http://www.qs-motor.com/product/061-dkd-speedometer-display-e-moped-dashboard/
Again, came with a QS138 kit, didn't use it.
Fuses: $5+ shipping each. 400A and 250A. The 250A are ANL size and come with a great little protective holder.
Shunt: $5+ shipping. 500A/50MV. Can be used with Cycle Analyst or other current monitors.
Bestechpower HS-017 $45 + shipping. Includes bluetooth dongle, HV relays, everything shown in the pictures.
HS-017 BMS: 16S Li-ion BMS 30A charging 150A discharging（Peak current 300A ）Separate port with Canbus， with Bluetooth
http://www.bestechpower.com/communicationbms/HS-017.html
Supposedly a very high quality BMS, and fully functional as far as I know, however I could never get the software to work right on my computer. No time to deal with it, I went with a Chargery unit which has it's own dedicated screen. I have all documentation and software I will send along.
60V-12V DC-DC converter
Standard 3 wire type. No more info on it. $10 shipped
8-40V to 13.8V DC-DC converter.
Used this to bump-up my standard DC-DC converter to a charge rate that would keep my 12V aux battery charged up in an electric motorcycle build. No longer needed. Standard 10A Chinese design, never had a problem with these. $15 shipped.
https://www.amazon.com/gp/product/B09T9XJ4ZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Motorcycle twist throttle / handlebar assembly. $10+shipping. Came in a QS138/Votol150 kit. No need for it, but tested fully functional.
DKD Dashboard- $35+shipping
http://www.qs-motor.com/product/061-dkd-speedometer-display-e-moped-dashboard/
Again, came with a QS138 kit, didn't use it.
Fuses: $5+ shipping each. 400A and 250A. The 250A are ANL size and come with a great little protective holder.
Shunt: $5+ shipping. 500A/50MV. Can be used with Cycle Analyst or other current monitors.
