Need Advice Upgrading Stand-up EScooter

[Moogoo88]

I want to upgrade to a stronger motor. I'm currently at 48v/13ah single hub. I am assuming 60v/3000w would give me more torque? I'm more interested in torque than top-end.

I've found plug-n-play components off AliExpress/Ebay/Amazon, but I'm not sure about the quality, installation/programming, or if I'm better off purchasing individual parts from different sources.

48V60V 3000W 3500W general purpose electric bicycle scooter off-road electric hub motor wheel controller LCD display kit

10 Inch Dual Drive Electric Motor 52V60V1600W3000W Powerful Electric Scooter Hub Motor Disc Brake Brushless Vacuum Tire E-Bike


Thanks in advance.

 

[calab]

More amps, but only if your hub motor can handle.
Are you sure that motor can really handle 3kw continuously?
You dont want that torque all the time right, just for the hills and taking off. Go 60v 50a for 3kw or go 48v 62a for 3kw, only change in speed. Play around with the motor simulator moving things around "custom" for 8" wheel, 0 watts pedaling etc. Look at the speed curve and the torque curve.

 

[Chalo]

If you want 3kW for top speed, you're a fool. Those small wheel scooters are a menace to their users and to emergency room personnel at 15 mph. If you want wall crawling torque and non-lethal speed, well that's another matter. Low volts and increased amps are your ticket. Understand that you will be much more able to abuse your scooter motor to death if you have more controller amps available.