Need help with Controller with Adjustable voltage

[ebike11]

Hi guys
Would anyone have used a controller from this aliexpress seller?


https://m.aliexpress.com/item/32851906082.html?trace=wwwdetail2mobilesitedetail&productId=32851906082&productSubject=BLDC-48V-96V-4000W-24-mosfet-sine-wave-controller-high-power-motorcycle-motor-controller-G-K161&spm=a2g0s.9042311.0.0.9f7d4c4dkwWGuy

I have the above controller and the seller sent instructions but they are all in Chinese. It came with a usb cable to connect the
controller to a computer for programming

It came set for 48V but Im looking to set it at 96V
Tried google and youtube but dont see anything

Thanks in advance!

 

[pwd]

Your aliexpress link isn't working for me. Also, if you can provide a screenshot of the programming software that may help.

 

[ebike11]

Your aliexpress link isn't working for me. Also, if you can provide a screenshot of the programming software that may help.

Thx for the repky...here is the link.
Ill also try and screenshot the software

https://m.aliexpress.com/item/32851906082.html?trace=wwwdetail2mobilesitedetail&productId=32851906082&productSubject=BLDC-48V-96V-4000W-24-mosfet-sine-wave-controller-high-power-motorcycle-motor-controller-G-K161&spm=a2g0s.9042311.0.0.9f7d4c4dkwWGuy

 

[pwd]

My knowledge is limited but it looks like a Kelly or Sabvaton controller. Here is a non-mobile link to the controller:
https://www.aliexpress.com/item/BLDC-48V-96V-4000W-24-mosfet-sine-wave-controller-high-power-motorcycle-motor-controller-G-K161/32851906082.html

If you attach the programming software here, we can take a look at it.

 

[ebike11]

My knowledge is limited but it looks like a Kelly or Sabvaton controller. Here is a non-mobile link to the controller:
https://www.aliexpress.com/item/BLDC-48V-96V-4000W-24-mosfet-sine-wave-controller-high-power-motorcycle-motor-controller-G-K161/32851906082.html

If you attach the programming software here, we can take a look at it.

It looks like a those controllers but from a different vendor. Not sure how similar they are overall.

When programming via USB cable, do I need to connect the controller to the battery pack and connect motor wires etc. in order to
program it, or can it be programmed without any power wires connected and only using the USB programming cable?

As you can see in this West Coast video, the controller is not powered at all to the battery pack.

https://www.youtube.com/watch?v=BHEdHFJKf4o