wojtek
100 kW
anyone has made a torque plate to match the diameter of this motor axle please? i would need a pattern to be input into CAD for laser cutting..
New Crystalyte Motor series (HT35 / HS35 and HT24 / HS24)
- Thread starter vodka
- Start date
therRealFury. When you bought your hub from cryst Europe what confirmation email etc did u get. So far I have got a order emial but nothing etc to say that it's been processed or posted out. Was your order the same or did they keep you informed throughout the process? Thanks
wojtek
100 kW
Webbo said:
it is normal, dont expect any emails...
I wish some good ES member based in Europe started to sell Xlytes and other ebikes stuff....
well they are not bad, but also not great
electricwheels.de
100 W
wojtek said:
Well, I'm working on it :wink: .
Soon I'll release some 8) modified HX-Motors ...
wojtek
100 kW
electricwheels.de said:wojtek said:
Well, I'm working on it :wink: .
Soon I'll release some 8) modified HX-Motors ...
tell me more! tell me quick
theRealFury
10 kW
Webbo said:
Yea, like Wojtek said, dont expect any emails. I never even got a confirmation email with my order. In fact, 2 and a half weeks later when i started chasing it my order status on crystalyte europe website still said "processed" which it said about 10 minutes after i placed it. I was waiting for a "shipped" or something like that. Only communication i ever got of any kind from crystalyte europe was when i called the international number and spoke to someone on the phone. Other than that they are useless at communication.
You can run CA on sensorless controller from Lyen, it is going cost you extra $10 dollars for adding CA wiring and connector to the controller. You even can ask Lyen give you a pointer how to install the CA wiring with the Lyen sensorless controller. He would very happy to help give you a guide.
I think Spacey is the one using Lyen sensorless controller with the HS motor. I am not sure if his Lyen controller include CA connector.
I think Spacey is the one using Lyen sensorless controller with the HS motor. I am not sure if his Lyen controller include CA connector.
electricwheels.de
100 W
wojtek said:electricwheels.de said:
Well, I'm working on it :wink: .
Soon I'll release some 8) modified HX-Motors ...
wojtek said:tell me more! tell me quick
Stage 1 in 3-4 weeks:
- # Standard axle with rounded edges on cable channel
# Fitting Honeywell Hallsensors SS413A with 3M Structural Adhesive DP 490
# Spec 44 Wire throughout (150°C rating, developed for aerospace and military requirements), AWG 24 to Hallsensors, AWG 12 to Coil windings (dia 0.31mm x 37 Strand)
# Anderson Powerpoles 45A
# Choice of Hall wire connector: Mini XLR Standard Crystalyte wiring, JST connector or Binder connector Series 712 IP 67 rating
# SKF bearings
# Black anodised side covers, modified to accomodate Plastic cable guide
# Stainless Steel flat head screws with TORX head
# Cable guide made from industrial plastic, CNC machined to our design and sealed with Würth K&D sealant
Stage 2 end of year:
- # As above but with 2 x AWG 12 Spec 44 wires per coil, 2 x 3 Anderson Powerpoles 45A
# High Tensile axle, CNC machined to our own design, larger dia shaft sides, larger cable channel, M14 x 1.5 Threads on either side
# Larger SKF Bearings
# Stainless Steel Cable guide with larger seal
Anything I forgot?
wojtek
100 kW
yes you did forget something
cooling system!
cooling system!
Electric wheels.de. Do have any instructions on where to place the ss413a on the motor. Has the hs motor already got some kind of mounting already installed in the motor for this sensor? Even better do you have so pictures showing one the proceedure thanks
electricwheels.de
100 W
Webbo said:
Sure have
mylittlepony
1 W
Hi Everyone,
My freewheel doesn't seem to fit the Hub properly. The freewheel is dragging against the hub. You can see the mark in the attached photo.
View attachment 1
It looks like I need to add a spacer. Would a spoke guard usually act as the spacer? What am I doing wrong.
Cheers
My freewheel doesn't seem to fit the Hub properly. The freewheel is dragging against the hub. You can see the mark in the attached photo.
View attachment 1
It looks like I need to add a spacer. Would a spoke guard usually act as the spacer? What am I doing wrong.
Cheers
itselectric
1 kW
mylittlepony:mylittlepony said:
You need a 1.5mm freewheel spacer.
![FreeWheelSpacer [800x600].jpg](https://endless-sphere.com/sphere/data/attachments/32/32327-cdee382e95b2e5b2b0567d57c584c601.jpg "FreeWheelSpacer [800x600].jpg")
Ken
electricwheels.de
100 W
mylittlepony said:
There should have been a dia 35.2mm x dia 40mm x 2mm thick spacer ring included with the hub motor when you unpacked it.
mylittlepony
1 W
I still have the packaging and have double checked, x-lyte europe didn't send the spacer. I've ordered a 1.5mm one which should do the trick. I'm not very impressed with x-lyte europe. Thanks for the help everyone.
currentFlo
10 mW
Hi mylittlepony,
I'm in the same case for the freewheel, I also ordered the hub from clyte europe and they don't provide any spacer.
Where have you ordered the 1.5mm spacer ?
Thanks
I'm in the same case for the freewheel, I also ordered the hub from clyte europe and they don't provide any spacer.
Where have you ordered the 1.5mm spacer ?
Thanks
electricwheels.de
100 W
Webbo said:
Sure, I have a few 8) Crystalyte wiring diagrams on my website:
http://electricwheels.de/electrical%20wiring%20diagram%20for%20Crystalyte%20hub%20motors.html
This is the one for the motor connection.
theRealFury
10 kW
Webbo said:
They dont contact you ever. I had to call them (Belgium number) to get my tracking number to find out that the shipping company tried to deliver it 10 days earlier but "forgot" to leave a card so i never knew. My motor was sat in a local shipping warehouse for 10 days
They are easy to speak to on the phone and did give me all the info i needed in the end but their lack of communications skills especially over email ( i emailed them 6 times over 2 months and did not EVER get ONE reply!) has lead me to make the decision not to purchase from them in future.
Spacey
100 kW
I came to the same conclusion.
el_bassboi_sv
10 mW
What size freehub are you using that it rubs?
7,8,9 speed?
would i still need a spacer with the 7speed cassette or only way is to put it on? Just got mine today, no spacer either...
7,8,9 speed?
would i still need a spacer with the 7speed cassette or only way is to put it on? Just got mine today, no spacer either...
electricwheels.de
100 W
el_bassboi_sv said:
Yep, otherwise your chain will hit the side cover of the motor.
theRealFury said:Webbo said:
They dont contact you ever. I had to call them (Belgium number) to get my tracking number to find out that the shipping company tried to deliver it 10 days earlier but "forgot" to leave a card so i never knew. My motor was sat in a local shipping warehouse for 10 days
So how long from you placing the order did the hub arrive in the uk? I am thinking that maybe it's here but I am not aware either even though it's only been a week since I made placed the order. What company actually makes the delivery is it parcel force,royal mail or some other courier? Thanks
