New 'waterless' washing machine

MitchJi

10 MW
Joined
Jun 2, 2008
Messages
3,246
Location
Marin County California
Hi,

Interesting idea.

Maybe Matt will become a dealer :p :mrgreen:.

http://www.guardian.co.uk/environment/2010/mar/09/xeros-washing-machine-bills
Leeds-based-Xeros-Ltds-wa-001.jpg

The Xeros washing machine uses up to 90% less water than a conventional one. Photograph: Xeros Ltd:
"Dry" cleaning is set to become a domestic activity with a washing machine that uses 90% less water than a normal laundry cycle and could be available by the end of 2011. The device, developed by Leeds-based Xeros Ltd, replaces water with tiny plastic beads that suck up stains and its producers claim it will shift stubborn pounds from household energy bills as well.

The Xeros (Site here) process uses 3mm-long nylon beads that can get into all the crevices and folds of clothing and can also be re-used hundreds of times. The beads flood the machine's drum once the clothes are wet and the humidity is at the right level. After the washing cycle is complete, the beads drain away in the same way as water in a conventional machine.

The chief executive of Xeros, Bill Westwater, said: "The net saving in water, detergent and electricity and including the cost of the beads, we calculate, is about a 30% cost saving for the user." He claims the machine has been tested successfully on a range of fabrics stained with everything from mud, red wine and curry stains to ink from ballpoint pens.

According to the Energy Saving Trust, just under one-third of household energy is used to heat water. Laundry washing also accounts for 15% of all household water consumption; meaning if everyone in the UK converted from normal washing to the Xeros system, the carbon emissions saved would be the equivalent of taking 1.4 m cars off the roads. Another perk of the device is that it should allow many delicates to be "dry" cleaned at home.

Xeros has already received research and development funding from Yorkshire Forward and has just returned from a government-sponsored "Clean and Cool" trade mission to the United States, aimed at securing investment from venture capitalists in Silicon Valley in California.

The idea for polymer-based cleaning came from Stephen Burkinshaw, a polymer chemist at Leeds University who spent 30 years working out how to improve the dyeing of plastics used in fabrics. A few years ago he realised that the stains on clothes acted in a similar way to dyes, and he wondered if he could use plastics to attract away the stains.

After experimenting with a range of plastics, he settled on nylon. Thanks to a natural property of the material, nylon beads attract stains to their surface and, in 100% humidity, the molecular structure of the plastic becomes amorphous, so the stains diffuse into the centre of the beads. "Not only are you able to suck the stain off the clothes, you're also able to ensure there's no deposition back onto the clothes," said Westwater.

When the beads are at the end of their life, saturated with dirt and stains, they can be collected and recycled into, for example, dashboards for cars. Eventually Westwater wants to design a closed-loop recycling system for his washing machines, where saturated beads can be refreshed and re-used in Xeros machines.

Westwater has already built a prototype washing machine and aims to have a product ready for the commercial laundry market by the end of next year, with a consumer version coming to market shortly afterwards. "There is more of a technical challenge [in development] as you compact the system. But it's not just about that - there's also consumer inertia. For millenia, people have been washing their clothes with water and a bit of detergent and suddenly we're coming along and saying that most of that water can be replaced by these beads. That's a big leap in the consumers' minds."

Claire Cunningham, a spokesperson for the government-backed Technology Strategy Board, said Xeros had an "interesting and innovative product" and the environmental and financial savings were of particular interest when it was selected to take part, along with the 18 other British clean technology companies, in the Clean and Cool trade mission.
 
Can I use the washer to deburr aluminum pieces when the wife is done with it? :D

Thats great if it works though..
 
a drier would be better as a rock tumbler since it is a front loader and you can get used ones pretty cheap.

just dont use your good modern front loader washer because even if it does not cause damage to the machine it could break the glass door plug you know the glass piece that sticks into the machine to defflect the load back into the machine so it does not hang in the door channel and would be expensive to get fixed.


vanilla ice said:
Can I use the washer to deburr aluminum pieces when the wife is done with it? :D

Thats great if it works though..
 
Hi,

They claim the system removes 99.95% of the beads (for 100k beads thats 50) and you can use a vacuum wand to manually remove the remainder .
http://www.xerosltd.com/downloads/press2009.pdf
SYNTHETIC fibres tend to make low quality clothing. But one of the properties that makes nylon a poor choice of fabric for a
shirt, namely its ability to attract and retain dirt and stains, is being exploited by a company that has developed a new laundry
system. Its machine uses no more than a cup of water to wash each load of fabrics and uses much less energy than conventional devices.

The system developed by Xeros, a spin-off from the University of Leeds, in England, and demonstrated at the Clean Show held in
New Orleans between June 18th and 21st, uses thousands of tiny nylon beads each measuring a few millimetres across. These are placed inside the smaller of two concentric drums along with the dirty laundry, a squirt of detergent and a little water. As the drums
rotate, the water wets the clothes and the detergent gets to work loosening the dirt. Then the nylon beads mop it up.

The crystalline structure of the beads endows the surface of each with an electrical charge that attracts dirt. When the beads are heated in humid conditions to the temperature at which they switch from a crystalline to an amorphous structure, the dirt is drawn into the core of the bead, where it remains locked in place.

At the end of the washing cycle, which takes about 30 minutes, the outer drum stops rotating. The inner
drum, containing the clothes and the beads, has a small slot in it. As it continues to turn, the beads fall
through the slot; some 99.95% of them are collected in the outer drum. Any beads trapped in the folds
of the clothes fall into a collection trough beneath the door to the machine as the clean laundry is
removed. Finally, the person taking out the clothes can use a vacuum wand to remove any beads
trapped in pockets, for example.


Because so little water is used and the warm beads help dry the laundry, less tumble drying is needed.
An environmental consultancy, URS Corp, commissioned by Xeros to test its system reckoned that its
carbon footprint was 40% smaller than the most efficient existing systems for washing and drying
laundry. It uses 90% less water, and the beads can be reused hundreds of times before being recycled.
The first machines to be built by Xeros will be aimed at commercial cleaners and designed to take loads
of up to 20 kilograms. Customers will still be able to use the same stain treatments, bleaches and
fragrances that they use with traditional laundry systems. Nylon may be nasty to wear, but it scrubs up
well inside a washing machine.
 
deronmoped said:
How do you get all the beads out of the pockets?

Deron.
I was wondering the same thing. Hope they don't melt in the dryer :D
 
Back
Top