Not sure the best approach

[Badcopyinc]

Waiting on my Nucular 24 so I figured I’ll start the battery.

I don’t know enough to make a informed decision on what’s the best approach. I have a vector vortex with the qs205 5t motor. And I have two different types of new battery packs to either wire up as they are or tear cells down from the packs and weld up a new pack.

I have a 20s ant 300a bms

The scooter packs are 10s 2p 4.4ah (LGMF1) and I have over 50 of these packs.

The CYCBT ebike packs say Samsung on case and are 10s 6p 15.6ah the cells have ICR18650 26V on them. I have over 8 of these.

Which packs would you suggest and should I just wire them parallel and series with bms or strip down and weld up. (I would of course remove from respective case to wire together)

 

[pwd]

If I was just picking between those two cells, I would choose the Samsung 26F over the LG lgeamf11865. It is rated for more capacity and higher discharge.

https://secondlifestorage.com/index.php?threads/samsung-icr18650-26f-cell-specifications.1783/
https://secondlifestorage.com/index.php?threads/lg-lgeamf11865-cell-specifications.2006/

That is of course if both cell types are genuine and in good health. You may want to test a few of each to help determine that.

 

[fatty]

Whichever tests better, or if not testing, the Samsung packs.
It's a waste to break down good 10s packs though, since two in series gives an ideal 20s. And if you need more capacity/discharge, just parallel whole packs at the string level.