windchaser
1 mW
- Joined
- Feb 11, 2017
- Messages
- 19
I am building a Qulbix 072r. I need some advice on electrical components and a question on battery.
I am going to be using the QS3 motor.
Qulbix now supplies Sabvoton SVMC072150 (72V 6kw) I am also looking at the Adaptto Max-E or mini-E controller as that seems to be the hot setup. Pros and cons for each? which would you use for this application?
Battery- I can either get a custom built 72v/20 to 25Ah- expensive and might take awhile-
or go with the battery packs from Vector- 4sx4=16S 16S*3.7V=59.2V 20Ah, I should be able to just get 4 in the frame.
By dropping from 72 to 59.2V- what difference am i going to see? I am assuming less power- but how perceptable is it going to be.
Are there any other batteries out there that you would recommend for this build.
thanks
g
I am going to be using the QS3 motor.
Qulbix now supplies Sabvoton SVMC072150 (72V 6kw) I am also looking at the Adaptto Max-E or mini-E controller as that seems to be the hot setup. Pros and cons for each? which would you use for this application?
Battery- I can either get a custom built 72v/20 to 25Ah- expensive and might take awhile-
or go with the battery packs from Vector- 4sx4=16S 16S*3.7V=59.2V 20Ah, I should be able to just get 4 in the frame.
By dropping from 72 to 59.2V- what difference am i going to see? I am assuming less power- but how perceptable is it going to be.
Are there any other batteries out there that you would recommend for this build.
thanks
g