Hi
I am looking for some help with a crystalyte controller and the R12 regen mod. I am running one of the new x5404 motors on about 80V of A123 and have lost my rear disc brake. It just won't fit
The 72v 50 amp controller I have (EB218-A-5) doesn't match any of the modded ones I have found searching and I'm not sure of the best place to put a parrallel resistor on the back of the board. (I am not confident enough with the iron to attempt to replace R12 alltogether)
Also wondering if this controller is programable. Is it worth adding a programing harness to it?
So any help on placement of the resistor on the back of the board would be appreciated. I have used Hyena's link to work out a value of 10k
http://endless-sphere.com/forums/download/file.php?id=63322
At the moment I think I have it right that the BK to GRD can be shorted here to get regen to work. Any idea if throttle regen is active by default or if I can just use an ebrake button? Would rather just the button.
View attachment 1
Sorry for the poor quality only got my phone to take photos. Heres a pic of the front of the board. The R12 is the top resistor of the ones in the circle.
Thanks
Rusted
I am looking for some help with a crystalyte controller and the R12 regen mod. I am running one of the new x5404 motors on about 80V of A123 and have lost my rear disc brake. It just won't fit
The 72v 50 amp controller I have (EB218-A-5) doesn't match any of the modded ones I have found searching and I'm not sure of the best place to put a parrallel resistor on the back of the board. (I am not confident enough with the iron to attempt to replace R12 alltogether)
Also wondering if this controller is programable. Is it worth adding a programing harness to it?
So any help on placement of the resistor on the back of the board would be appreciated. I have used Hyena's link to work out a value of 10k
http://endless-sphere.com/forums/download/file.php?id=63322
At the moment I think I have it right that the BK to GRD can be shorted here to get regen to work. Any idea if throttle regen is active by default or if I can just use an ebrake button? Would rather just the button.
View attachment 1
Sorry for the poor quality only got my phone to take photos. Heres a pic of the front of the board. The R12 is the top resistor of the ones in the circle.
Thanks
Rusted