stuntmanmike
100 W
I recently improved my "Ripper" mount design & had a few extra sets machined locally. This time I used cold rolled steel for the motor mount, insuring that they will not bend. The circular truck mount stays the same with the only difference being where the motor mount sits, which is not tapped but can be by the user. I found it easier not to tap them which left me with more hardware options.
So to be clear I will include:
2 Circular Counter sunk Aluminum Truck Mounts,
2 Machined Steel Motor mounts
**All mounting hardware(bolts,counter sunk washers,lock washers, & aluminum nuts all of which are super high tensile strength & high quality).
This is not a sale thread, I just want to see if anyone is still interested as many of you PM'd me about these during my build.
Thanks
Mike
View attachment 5
So to be clear I will include:
2 Circular Counter sunk Aluminum Truck Mounts,
2 Machined Steel Motor mounts
**All mounting hardware(bolts,counter sunk washers,lock washers, & aluminum nuts all of which are super high tensile strength & high quality).
This is not a sale thread, I just want to see if anyone is still interested as many of you PM'd me about these during my build.
Thanks
Mike
View attachment 5
