Cam3roon2k41999
1 W
- Joined
- Nov 28, 2021
- Messages
- 59
Hi, this is my first post.
I have a 3000w 72v hub motor kit from Solos bikes UK, I'm currently using a BTRpower 60v 25ah battery( fully charges at 71.4v)
And I recently purchased a 150a sabvoton controller and when i set it all up it was working perfect until I throttled hard all the power would cut out until I reconnected the battery,
Could anyone give me any advice on what settings could effect the cut out in the MQCON app as I'm not sure if it's related to DC current or phase current, it stopped cutting out for now after I lowered the Current limiting Voltage, rated DC current, Rated Phase Current but the acceleration is quite weak and I have hard start enabled and mid voltage is set to 2.00v.
Thanks guys,,
I have a 3000w 72v hub motor kit from Solos bikes UK, I'm currently using a BTRpower 60v 25ah battery( fully charges at 71.4v)
And I recently purchased a 150a sabvoton controller and when i set it all up it was working perfect until I throttled hard all the power would cut out until I reconnected the battery,
Could anyone give me any advice on what settings could effect the cut out in the MQCON app as I'm not sure if it's related to DC current or phase current, it stopped cutting out for now after I lowered the Current limiting Voltage, rated DC current, Rated Phase Current but the acceleration is quite weak and I have hard start enabled and mid voltage is set to 2.00v.
Thanks guys,,