schwinn stingray spoiler

[bobby3legs]

I have a 680w brushless motor and would like to put it on a chopper. I have my bike now running on 36v lifepo4 and i have another battery sitting. i was wondering how to use what i have as far as motor and batteries and turn the chopper into a 72v machine. is this possible? and if it is what kind of controller do i need and do i have to change the throttle? both batteries have bms do i have to reconfigure? Before i buy the chopper i would really appreciate any help

 

[spinningmagnets]

How is the motor attached to your bike now? (any pics? that would explain a lot)

It sounds like its not a hub-motor, but perhaps similar to a TNC scooter motor? Which model chopper-bike do you hope to get? it would help focus useful suggestions...

 

[bobby3legs]

http://ibikedb.net/bikes/14329-schwinn-stingray-spoiler <----- this is a pic of the bike i want to put the motor on. its a front wheel motor. i spoke with a guy who had a rear wheel motor and wished he put a front for many reasons. i would have picked his brain more but that was when the idea of getting one just was seeded. never got a chance to talk again.

 

[bobby3legs]

and yes it is a hub

 

[amberwolf]

And since there are now three threads about this same project, here's links to the other two so anyone helping in one thread can also see the info in the other two and maybe help the OP find a solution in one of the threads, at least.

http://www.endless-sphere.com/forums/viewtopic.php?f=1&t=13393
http://www.endless-sphere.com/forums/viewtopic.php?f=2&t=13386