Hi Folks,
Just a quickie for the smart people in here:
I have a new bigger shunt for my build and I am wondering, as it is rather large and bulky (in comparison to the old one), if it is possible to cut the ends off (the areas where bolts can be passed through for cable connections) so long as the centre resistance bars material is left untouched or would that just balls the whole thing up?
link for an idea of what I am talking about https://www.ebay.co.uk/itm/Shunt-300A-50mV/283188747091?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
Thanks
Just a quickie for the smart people in here:
I have a new bigger shunt for my build and I am wondering, as it is rather large and bulky (in comparison to the old one), if it is possible to cut the ends off (the areas where bolts can be passed through for cable connections) so long as the centre resistance bars material is left untouched or would that just balls the whole thing up?
link for an idea of what I am talking about https://www.ebay.co.uk/itm/Shunt-300A-50mV/283188747091?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
Thanks