some question of the ebike contoller Wiring Diagram

[dogman dan]

Connect the eabs jumper wire to itself to enable eabs.

To work, you must also have the brake handles with the brake wires and switches, and have them plugged into the brake wire plug.

 

[NeilP]

I think EABS is the e-brake system, though twhat the 'Automatic Study System ' is is any ones guess

 

[NeilP]

Well if you have the correct brake levers and they are connected to the brake line...probably the two wire low voltage brake wire, then when you pull the brake lever, the motor power is probably cut and the motor acting as a generator slows you down