Stealth Clone Info

[MDG]

Hey all, happy new year!

I intend to build a stealth clone in the coming months and thought about making a thread for those seeking info, help, parts, etc... Looking to do something similar to CAB Motorworks but built to my own taste.

I do have a question to start things off! I plan on using the frameset from EnduroEBike.com (https://www.enduroebike.com/index.php?route=product/product&path=137_125_126&product_id=254)

MySuperEbike also sells this frame kit and uses it on their eBike V4.2 v4.2 super Ebike - MySuperEbike

Curious if anyone has ever ordered from them? NB Powers also sells this frame via Amazon, eBay or direct.
I was looking at the Vector setup as well as ELEEK but I think this frame will be OK.

From here I plan to do 17" wheels as I LOVE the SuperMoto look and not the biggest fan of 19's. This will be fitted with a set of 800MM dirt bike forks, custom 17" front rim and then a 205 5T rear in a 17" Excell rim.

I have a lot of experience with VOTOL and FarDriver controllers and AMORGE batteries from other builds. So, plan to run a 72V setup at around 100-125A continuous and hopefully 30-35AH pack. I think this will be a good amount of torque, speed, etc...

Thanks, and look forward to hearing everyone's thoughts and seeing some clone builds!

 

[MDG]

Updating this as I have done some more homework!

I think I will end up going with either the Vector or ELEEK frame. From my research, Vector and ELEEK use the same frames. I think ELEEK is the OG frame builder for the Stealth Bomber style spatial frame. The amazon / eBay frames visually look weaker and with less support.

Now I need to figure out if I want to run traditional e-bike forks or get a set of pit bike / dirt bike forks. I much prefer the dirt bike brakes. The calipers and rotors are much beefier.

For controllers, even though I have experience with VOTOL and FarDriver, they are still on the bigger side of dimensions. I'd like to keep the controller either in the body work with some custom venting / air flow to it or go with a company such as Silicon Controllers. They have a 10KW controller that is very compact.

10 kW brushless motor controller | siliXcon

Thoughts?

 

[Mattbastard]

Updating this as I have done some more homework!

I think I will end up going with either the Vector or ELEEK frame. From my research, Vector and ELEEK use the same frames. I think ELEEK is the OG frame builder for the Stealth Bomber style spatial frame. The amazon / eBay frames visually look weaker and with less support.

Now I need to figure out if I want to run traditional e-bike forks or get a set of pit bike / dirt bike forks. I much prefer the dirt bike brakes. The calipers and rotors are much beefier.

For controllers, even though I have experience with VOTOL and FarDriver, they are still on the bigger side of dimensions. I'd like to keep the controller either in the body work with some custom venting / air flow to it or go with a company such as Silicon Controllers. They have a 10KW controller that is very compact.

10 kW brushless motor controller | siliXcon

Thoughts?

How's this build coming along?