tritonwow
100 W
- Joined
- Jun 7, 2009
- Messages
- 104
Ok,
Parts are rolling in and I'll use this as my build thread.
Tidalforce red S-750 frame
JRH 26" wheelset (all black with alternating red nipples and Bafang SWXH rear hub motor; matching front wheel)*
Rock Shoxx Dart2 forks (using disc only Dart3 lowers)
FSA PIG PRO headset
Avid BB7 mechanical 160mm disc brakes
DMR Wingbar cromo lowriser bar Old: Truvativ bars (might change to a lowrise BMX style)
Ergon grips
Thudbuster LT seatpost
n'lock security stem
OEM crankset
Cycle Analyst (CA)
ZIPPY Flightmax 5000mAh 6S1P 15C (for 44.4v10Ah)
Infineon 25A brushless controller with 6xIRLB4030 mosfets,ON/OFF button, Fwd/Rev, ebrake, and CA connectors
Andersen Powerpole 30 and 45a connectors
I'll make a battery/controller/tire pump/small stuff compartment box out of carbon fiber or CF/kevlar in the triangle. I also plan to make CF fenders using the V brake mounts as mounting points for the fenders. I ride in all weather so we'll see if this lasts in the tropical rainstorms!
I plan to use an RC controller (CC ICE HV).
I plan to use a single sprocket in the rear and either the 48/38/28 front sprokets (but I've been thinking about this: http://www.kinetics.org.uk/html/mountain_drive.shtml
Oatnet sells a wonderful centerstand but it's too heavy IMHO so I'll fab a CF one using it as a model; it only needs to keep the bike upright without a passenger!)
Anyhow, more to come as the parts arrive
Triton
Parts are rolling in and I'll use this as my build thread.
Tidalforce red S-750 frame
JRH 26" wheelset (all black with alternating red nipples and Bafang SWXH rear hub motor; matching front wheel)*
Rock Shoxx Dart2 forks (using disc only Dart3 lowers)
FSA PIG PRO headset
Avid BB7 mechanical 160mm disc brakes
DMR Wingbar cromo lowriser bar Old: Truvativ bars (might change to a lowrise BMX style)
Ergon grips
Thudbuster LT seatpost
n'lock security stem
OEM crankset
Cycle Analyst (CA)
ZIPPY Flightmax 5000mAh 6S1P 15C (for 44.4v10Ah)
Infineon 25A brushless controller with 6xIRLB4030 mosfets,ON/OFF button, Fwd/Rev, ebrake, and CA connectors
Andersen Powerpole 30 and 45a connectors
I'll make a battery/controller/tire pump/small stuff compartment box out of carbon fiber or CF/kevlar in the triangle. I also plan to make CF fenders using the V brake mounts as mounting points for the fenders. I ride in all weather so we'll see if this lasts in the tropical rainstorms!
I plan to use an RC controller (CC ICE HV).
I plan to use a single sprocket in the rear and either the 48/38/28 front sprokets (but I've been thinking about this: http://www.kinetics.org.uk/html/mountain_drive.shtml
Oatnet sells a wonderful centerstand but it's too heavy IMHO so I'll fab a CF one using it as a model; it only needs to keep the bike upright without a passenger!)
Anyhow, more to come as the parts arrive
Triton