Trying to make a 52v in Hailong3

[Noosi]

Hi is it possible to make a 52v battery using a 65cell case Hailong3.

The cells i have are VAPCELL 3.7v 3500ma 10a / 25a ?

 

[Noosi]

I had the battery setup like this as a 48v but as I will be upgrading controller's to a ASI I was thinking I might aswell make it a 52v?

Is it possible to fit the batteries in a 52v configuration?

Also does anyone know if I make a battery using the VAPCELL 10a/25a,
Would this make a 48v battery compatible with a upgraded controller? or is my thought process completely off.

https://www.vapcelltech.com/h-pd-78.html

 

[docw009]

How does 65 holes divide by 14? You can make a 14S-4P battery. That will be 56 cells. So the answer is yes.

I know nothing about Vapcells, but they are not cheap at $7-8 each, so maybe they're rebranded quality cells. Mos 48V controllers will run on 14S.

 

[999zip999]

Have you bought the cells yet ? re-read the first post I guess you have already bought the cells how much were they

 

[Noosi]

I bought the cells at a reliable source local to me, he sold me 65 cells at $6 aud ea which I considered to be a very reasonable and good price.

Also asked him to charge each cell as they are a battery shop its been now 3 weeks and batteries holding a voltage of 4.0 to 3.9 each one with majority at 4.0 from 4.2 when I first received.

 

[j bjork]

I dont really see the point of buying re wrapped cells.
They are usually either a quality cell that are a little more expensive than the original, or just any cheap cell re wrapped.
They can of course change at anytime.

I checked mooch reviews, but it seems like he hasn't tested this cell.
The closest seem to be this one:
https://www.e-cigarette-forum.com/threads/bench-test-results-vapcell-green-f35-%E2%80%93-10a-3500mah-18650-overrated-capacity-good-performer.949707/