Vesc hgltech 75v 200amps

[tailele]

Good morning bus, i m news, and i m trying ti build a e-bike with this vesc... Now i connect motors, One rear and One front correctly...but i miss to connect the throttle and the brake. Really the throttle works, but the brake not verry well.
I connect :
Throttle , Red to 5 v , black to gnd and signal to ADC
Brake , One cable on ADC 2 and the second cable to 3.3v..


I m wrong ? I don t find a wrong diagram so for me It Is difficult. Thanks a lot

 

[Hayds13]

This might help....Ebike Throttle and Brake Connect to VESC and Parameters Setting Tutorial | Flipsky

https://www.youtube.com/watch?v=44qoVyJf-uk

 

[district9prawn]

You should connect the throttle 5v to the vesc 3.3V supply. This way you will keep the signal value below the maximum of 3.3V.